NATIONAL INSTITUTE OF TECHNOLOGY SILCHAR

राष्ट्रीय प्रौद्योगिकी संस्थान सिलचर

Department of Mechanical Engineering

International Conferences



  1. 3. Laser Beam Micromachining of Metals: A Review, Dhiraj Raj, B.V.R. Reddy, S.R. Maity, K.M. Pandey , 1st International Conference on Advances in Materials and Manufacturing Engineering(ICAMME-2018), January 24-25,2018 , Nagarjuna University, Guntur, Andhra Pradesh
  2. 2. Effect Of Cold Rolling On Microstructural Properties Of Spray Deposited Al-%18Pb And Al-%22Pb Alloys, Bandi Venkata Ramana Reddy, Saikat Ranjan Maity, and Krishna Murari Pandey, 9th International Conference on Materials Processing and Characterization, GRIET, Hyderabad, March 8-10 2019.
  3. 1. Effect of cold rolling on porosity, hardness properties of the spray deposited Al-18%Pb and Al-22%Pb Alloys, Bandi Venkata Ramana Reddy, Saikat Ranjan Maity, and Krishna Murari Pandey, 9th International Conference on Materials Processing and Characterization, GRIET, Hyderabad, March 8-10 2019.
  4. Manohar, G., Dey, A., Pandey, K.M. and Maity, S.R., 2018, April. Fabrication of metal matrix composites by powder metallurgy: A review. In AIP Conference Proceedings (Vol. 1952, No. 1, p. 020041). AIP Publishing.
  5. Tripathi, S. and Pandey, K.M., 2018, April. Review on factors affecting the performance of pulse detonation engine. In AIP Conference Proceedings (Vol. 1952, No. 1, p. 020090). AIP Publishing.
  6. Yadav, S. and Pandey, K.M., 2018, April. Study on effect of mixing mechanism by the transverse gaseous injection flow in scramjet engine with variable parameters. In AIP Conference Proceedings (Vol. 1952, No. 1, p. 020097). AIP Publishing.
  7. Alam, N., Sharma, K.K. and Pandey, K.M., 2018, May. Numerical investigation of combustion phenomena in pulse detonation engine with different fuels. In AIP Conference Proceedings (Vol. 1966, No. 1, p. 020015). AIP Publishing.
  8. Sahu, M.K., Pandey, K.M. and Chatterjee, S., 2018, May. Numerical investigation of thermal-hydraulic performance of channel with protrusions by turbulent cross flow jet. In AIP Conference Proceedings (Vol. 1966, No. 1, p. 020021). AIP Publishing.
  9. Jaiswal, S., Deoghare, A.B. and Pandey, K.M., 2018, January. Mass concentration analysis of aerosol through human airways. In 2018 2nd International Conference on Inventive Systems and Control (ICISC) (pp. 334-338). IEEE.
  10. A. P. Singh , Oveepsa Chakraborty and K. M. Pandey, CFD Analysis of Cavity Based Combustion of Hydrogen at Mach number 1.2” The 11th Asian International Conference on Fluid Machinery and the 3rd Fluid Power Technology Exhibition. Paper ID: AICFM_ES_002, November 21-23, 2011, IIT Madras, Chennai, India.
  11. S. K.Reddy, K. M. Pandey and A. P. Singh “Numerical Simulation with k-ε Turbulence Model for Combustion Chamber of Rocket Engines” The 11th Asian International Conference on Fluid Machinery and the 3rd Fluid Power Technology Exhibition. Paper ID: AICFM_ES_001, November 21-23, 2011, IIT Madras, Chennai, India.
  12. K.M.Pandey and S.S.Vel, CFD Analysis of Scramjet Combustor Using Strut with Circular and Planer Injector presented and published in IMECE2010, 2011 ASME International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, Colorado, USA(IMECE 2011-62310)
  13. K. M. Pandey and Surya Kumar, : Computational Simulation and Effect of Swirl Angle on Soot Formation of 2D Swirl Burner in Gas Turbine, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  14. K.M.Pandey, P.L. Choudury and N.Pradeep Kumar, Transient analysis of a thin film lubricated journal bearing at 1500 rpm, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  15. K.M.Pandey and S.N.Pandey, Comparative study of co2 capture and storage technology : A Review, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  16. P.Bose and K.M.Pandey, Structural failure analysis of rocket motors, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  17. K.M.Pandey, L.Roy and S.S.Saha, , CFD analysis for pressure and temperature and pressure of multi lobe bearings at 40,000 RPM for a gas turbine engine, Proceedings of IMECE2010, 2010 ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada(IMECE10-40136).
  18. K.M.Pandey, P.L.Choudhury and A.K.Singh,CFD analysis of journal bearing of steam turbine for 210 Mw power output , Proceedings of IMECE2010, 2010 ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada(IMECE10-37500)
  19. K.M.Pandey, D,H,Das and T.S.Dey, Numerical analysis of variation of pressure and velocity at inlet and exhaust of a turbo-jet engine with Fluent software, Proceedings of IMECE2010, 2010 ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada(IMECE-37500)
  20. K.M.Pandey, A.P.Singh and R.Sudarshan, CFD analysis of a Kaplan turbine at a head of 15 meters with Fluent software, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  21. K.M.Pandey and S.K.Yadav, : CFD Analysis for pressure and temperature for a rocket nozzle with two inlets at mach 2.1 and the comparison with single inlet, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  22. K.M.Pandey and S.N.Pandey, CFD analysis of combustion phenomena at high speed fuel inlet of Mach 0.9 for methane without bluff body, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  23. Sangeeta Pathak and K.M.Pandey, Experimental studies on genotoxic effects of pesticides on M1 generation of peas, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  24. K.M.Pandey and Videsh Roy, Intake valve design for high level swirl induction in carbureted park ignition engine, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  25. K.M.Pandey and A.K.Johri, A review on recent research in CFD area in context with hydraulic turbines, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  26. K.M.Pandey, D.H. Das and Amitava Roy, Numerical Studies on Variation of Pressure and Velocity inside the Combustion Chamber of a Turbojet Engine with Fluent Software, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  27. K.M.Pandey, A review on wind energy generation, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  28. K.M.Pandey, P.L.Choudhury and A.K.Singh, CFD analysis of horizontal axis wind turbine, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  29. K.M.Pandey Prateek Srivastava, K.C.Sharma and A.P.Singh, Study on supersonic flows in the De Laval nozzle at Mach number 1.5 and its base pressure in a suddenly expanded duct, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India.
  30. K.M.Pandey, P.L.Choudhury, A.P.Singh Amrit Kumar Singh and Kamlendra Singh, Cfd Analysis Of Journal Bearing Of Hydraulic Turbine For 210 Mw Power Output, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India.
  31. K.M Pandey, L.Roy, A.P.Singh, S.S.Saha, I. Haque, CFD Analysis For Pressure And Temperature of Multilobe Bearings At 20000 Rpm For A Gas Turbine Engine, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India.
  32. K.M.Pandey Prateek Srivastava, K.C.Sharma and A.P.Singh, Study on supersonic flows in the De Laval nozzle at Mach number 1.5 and its flow development in a suddenly expanded duct, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India.
  33. K.M.Pandey, Virendra Kumar and A P Singh, Study on free single jet flow: a numerical analysis with fluent software, the 10th Asian symposium on visualization, March1-5, 2010, SRM University, Chennai, India
  34. K.M.Pandey, Surendra Yadav and A P Singh, Study on rocket nozzles with combustion chamber, using fluent software at Mach 2.1, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India
  35. G.Sharma, R.Jagannath and K.M.Pandey, Wall Static Pressure Variation in Sudden Expansion in Flow Through Nozzles at Mach 1.74 and 2.23: A Fuzzy Logic Approach, The 2nd International Conference on Machine Learning and Computing (ICMLC 2010),Bangalore,India,February,9-11,2010, PP.243-247, ISBN 978-0-7695-3977-5
  36. K.M.Pandey, Studies on Base Pressure in Suddenly Expanded Circular Ducts: A Fuzzy Logic Approach, The 2nd International Conference on Machine Learning and Computing (ICMLC 2010), Bangalore, India, February 9-11, 2010, PP.237-242, and ISBN 978-0-7695-3977-5
  37. K.M. Pandey, A.P Singh and R. Sudersan, Computational studies on total pressure loss in De Laval Nozzle at Mach 2.1 in Sudden expansion duct with fluent software.3rd International Conference at advances in Mechanical Engineering, department of mechanical engineering, SVNIT Surat, Jan. 4-6, 2010, pp.224-228.
  38. K.M.Pandey and Amrit Sarkar, Thermal analysis of nuclear fuel elements with Ansys software, International Conference on Nuclear Engineering(ICONE-17) organized by ASME, Brussels, Belgium, July 12-16, 2009.The paper was presented but it is not published in the proceedings.
  39. Sangeeta Pathak and K.M.Pandey, Studies on doses of pesticideson mutations in seed character of the plants for a better environment, Proceedings of International conference on energy and environment, March 19-21, Taj Chandigarh, Chandigarh, India PP 778-780. Published online on World Academy of Science, Engineering and Technology, Volume 39, March 2009, ISSN 2070-3740.
  40. S.Deb Barma, K.M.Pandey and U Kumar, Review on noise pollution from internal combustion engines, Proceedings ofInternational conference on energy and environment, March 19-21, Taj Chandigarh, Chandigarh, India.PP.111-114 Published online on World Academy of Science, Engineering and Technology, Volume 39, March 2009, ISSN 2070-3740..
  41. Geeta Kumari, J.S.Virk and K.M.Pandey, Health effects of software people: an overview, Proceedings of the 6th AIMS International conference on management, Indian Business Academy, Greater Noida, December 28-31, 2008 PP.371-374.
  42. Geeta Kumari , K.M.Pandey and J.S.Virk Training and development needs of human resources in a software company: a case study of Cadtrium Engineering solutions Delhi, Proceedings of the 6th AIMS International conference on management , Indian Business Academy, Greater Noida, December 28-31, 2008 PP.365-370..
  43. Pandey K.M., Mohnish Kumar, Shushil Kumar and Amit Kumar, Studies on base pressure in sudden expansion in flow through nozzles at Mach number 2.4: A fuzzy logic approach, International Conference on recent advances in experimental fluid mechanics, K.L.College of Engineering, Vijaywada, and March 3-6, 2008.
  44. Pandey K.M., Mohnish Kumar, Shushil Kumar and Amit Kumar, Studies on wall static pressure in sudden expansion in flow through nozzles at Mach number 1.58: A fuzzy logic approach, International Conference on recent advances in experimental fluid mechanics, K.L.College of Engineering, Vijaywada, March 3-6, 2008.
  45. Amrit Sarkar and K.M.Pandey, Temperature distribution from a nuclear fuel rod using Pde tool of Matlab, International Conference on Modeling and Simulation, CITICOMS 2007, Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore, India, August 27-29, 2007
  46. K.Deb, U.Kumar and K.M.Pandey, Studies of reverberation time for the room with 200 KVA diesel generator set without enclosures, International Conference on Modeling and Simulation, CITICOMS 2007, Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore, India, August 27-29, 2007.
  47. Geeta Kumari, Vandana Sharma and K M Pandey, performance evaluation of human resource in a small enterprise company, 8th International Conference on operations and quantitative management, emerging perspective of decision making in a new globalized world, theory, practices and future directions, AIMS International and ABAC School of management, Assumption University, Bangkok, Thailand, October , 17-20, 2007.
  48. Geeta Kumari, Vandana Sharma and K M Pandey, training needs identification in the development of software technology in a small enterprise, 8th International Conference on operations and quantitative management, emerging perspective of decision making in a new globalized world, theory, practices and future directions, AIMS International and ABAC School of management, Assumption University, Bangkok, Thailand, October 17-20, 2007
  49. Geeta Kumari, Vandana Sharma and K M Pandey and Sanjay Pandey, Training and development needs of human resources in a software company: a case study of Cadtrium engineering solutions (P) Ltd. Gurgaon, accepted in Guru Nanak Institute of Management and Technology Ludhiana in International Conference on Management challenges in the present era Institute of Management and Technology, May 05, 2007.
  50. Geeta Kumari, Vandana Sharma and K M Pandey, Human resource practices in private sector: a case study of Cadtrium engineering solutions (P) Ltd. Gurgaon, presented in International Conference on Research in Management and Technology, Gyan Jyoti Institute of Management and Technology, Mohali, Chandigarh, March 23-24, 2007
  51. Geeta Kumari, Vandana Sharma and K M Pandey, Advances in mechanical engineering software management, accepted in International Conference on Technology Management, Kolej University Technology, Tun Hussein Onn (KUiTTHO), Faculty of Technology management, Palm Garden Hotel, IOI Resort, Kuala Lumpur, Putryjaya, Malaysia, December 4-5, 2006
  52. K.M.Pandey and R. Deb, International conference on heat power cycles, Thermo economic optimization of solar driven irreversible heat engine, September 11-14, University of Newcastle, Newcastle, United Kingdom.
  53. K.M.Pandey and M. Mahesh, Determination of temperature distribution in a cylindrical nuclear fuel rod- a mathematical approach, International conference on heat power cycles, September 11-14, university of Newcastle, Newcastle, United Kingdom.
  54. K.M. Pandey and M Mahesh, and heat transfer analysis in a work roll in cold rolling process, 13 th International heat transfer conference, Sydney, Australia, 13-18 August 2006.
  55. M Ray, K.M. Pandey and P Mahanta, , 13th International heat transfer conference, Sydney, Australia, heat transfer characteristics of circulating fluidised bed ,13-18 August 2006
  56. K.M.Pandey and R. Deb, Thermoeconomics of an irreversible solar driven heat engine, Advanced computational methods in heat transfer IX, Wessex institute of Technology, Ashurt lodge, New Forest,U.K. July 5-7, 2006, PP 417-426 Witpress 2006, ISBN- 1-84564-176-0, ISSN 1743-3533 Online, ISSN- 1746-4471 Print.
  57. K M Pandey and D Sen, Energy Management: National Scenario, International conference on Challenges and Strategies for Sustainable Energy, Efficiency and Environment, UP Technical University Lucknow, 10-11 June 2006
  58. K.M.Pandey and Manoj Kumar, Commercial, Institutional and Industrial Recovery in Waste Management: A Case Study of West Virginia, 2nd International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management, De La Salle University, Philippines, Hotel Hyatt Regency, Manila, Philippines,
  59. K.M.Pandey and Geeta Kumari, Present status of India in non-conventional power generation: an overview, The International Association of Science and Technology for Development-USA, International Conference on Power and Energy Systems(PES 2004), Clearwater Beach, Florida, USA, November 28 to December 01 2004.
  60. K.M.Pandey and Geeta Kumari, Recent advances in non-conventional energy systems: a case study of developments in India, The International Association of Science and Technology for Development-USA, International Conference on Power and Energy Systems (PES 2004), Clearwater Beach, Florida, USA, November 28 to December 01 2004.
  61. K.M.Pandey and Geeta Kumari, Usage of renewable energy: a solution towards environmental pollution control, The International Association of Science and Technology for Development-USA, International Conference on Power and Energy Systems (PES 2004), Clearwater Beach, Florida, USA, November 28 to December 01 2004
  62. K.M.Pandey and Geeta Kumari,, Review of media awareness to control environmental pollution: a case study of NIT Silchar, International Association of Science and Technology for Development-USA, International Conference on Environmental modelling and Simulation(EMS 2004), St. Thomas, Virgin Islands, USA, November 22 to 24 2004.
  63. K.M.Pandey and Geeta Kumari, Gasifier technology: a novel solution to rural energy requirements, presented in first International Conference on Renewable Energy organized by Central Board of Irrigation and Power, Le Mandarin Hotel, Jan path, New Delhi, Oct 6-8 2004
  64. K. M .Pandey, P. Jain , D. Dandotiya and A.K.Pandey, Recent advances in solar photovoltaic energy systems: an overview, 14th International Photovoltaic Science and Engineering Conference, Chulalongcorn University, Bangkok, Thailand, Jan.26-30, 2004.
  65. A.K. Pandey, K.M. Pandey and J.S. Virk, Pollution control of air” an overview, accepted in 12th International Scientific Symposium on Transport and Air pollution, Avignon, France, 16th – 18th June, 2003.
  66. K.M. Pandey and A.K. Pandey, Usage of non conventional power generation for controlling environmental pollution: - A case study of Silchar city, accepted in 12th International Scientific Symposium on Transport and Air pollution, Avignon, France, 16th – 18th June, 2003.
  67. Pandey K M and Dharmendra Kumar, Fast Discovery of Association Rules from Transaction Databases, presented in 47th congress of ISTAM, IIT Guwahati, Dec 23-26, 2002.
  68. Pandey K M and Dharmendra Kumar, Automated Speaker Recognition using Principal Component Analysis, presented in 47th congress of ISTAM, IIT Guwahati, and Dec 23-26, 2002.
  69. Pandey K M, Promoting and sustaining innovations in technician education and training, accepted in International Conference on Ship and Ocean Technology, Department of Naval Architecture IIT Kharagpur India, Dec 18-20, 2002.
  70. Virk J S and Pandey K M, Concept and Philosophy behind Competence-Based Training, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002.
  71. Sharma D K, and Pandey K M, Role of Various Agencies in Planning and Implementing Competence-Based Training In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002.
  72. Pandey K M, An Introduction to DACUM, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 133-140.
  73. Pandey K M and Satpathy K C, Competency-based technical education and training, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 117-132.
  74. Pandey K M and Satpathy K C, Design and Development of Instructional Material, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 108-116.
  75. Pandey K M, The implications of CBT: a case study of education in Australia, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 93-107.
  76. Pandey K M, Characteristics of Competency-based training programmes, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College for Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 78-92.
  77. Pandey K M, Workplace Competency: An Overview, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 65-77.
  78. Pandey K M, The Impact of CBT on Curriculum Process, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 50-64.
  79. Pandey K M, Research based learning, In-country Programme on Promoting and Sustaining innovations in technician education and training for Philippines in collaboration with technical education and skills development authority (TESDA), Philippines by Colombo Plan Staff College for Technician Education, Manila, Philippines at TESDA conference room, Taguig, Manila, Sept 30 - Oct 11, 2002, pp 82-86.
  80. Pandey K M, Technological innovations: an overview In-Country Programme on promoting and sustaining innovations in technician education and training for Philippines in collaboration with technical education and skills development authority (TESDA), Philippines by Colombo Plan Staff College For Technician Education, Manila, Philippines at TESDA conference room, Taguig, Manila, Sept 30 - Oct 11, 2002, pp 52-62.
  81. Chaudhary D N and Pandey K M, promoting and sustaining innovations in technicians education and training, In-country programme on promoting and sustaining innovations in technician education and training for Philippines in collaboration with technical education and skills development authority (TESDA), Philippines by Colombo Plan Staff College For Technician Education, Manila, Philippines at TESDA conference room, Taguig, Manila, Sept 30 - Oct 11, 2002, pp 48-51.
  82. Chaudhary D N and Pandey K M, Management of technical innovations, In-country programme on promoting and sustaining innovations in technician education and training for Philippines in collaboration with technical education and skills development authority (TESDA), Philippines by Colombo Plan Staff College For Technician Education, Manila, Philippines at TESDA conference room, Taguig, Manila, Sept 30 - Oct 11, 2002, pp 43-47.
  83. Pandey K M and Pandey A K, Impact of Utilization of Non-Conventional Energy Sources on the Environment, accepted in World Renewable Energy Congress VII, Cologne, Germany, and June 29 - July 5, 2002.
  84. Pandey A K and Pandey K M, Recent advances in air pollution control, presented in International Symposium on Techno-Commercial and Decentralized Approach in Waste to Energy, Department of Mechanical Engineering, Malviya Regional Engineering College, Jaipur, India, and March 1-3, 2002.
  85. Participated in an International Conference on Recent Advances in Experimental Fluid Mechanics Dept of Aerospace Engg, IIT Kanpur as member of International Technical Committee, Dec 18-20, 2000.
  86. Pandey K M, Review on flow through nozzles in sudden expansion, 22nd International Symposium on Space Technology and Science, Morioka, Japan, May 28 - June 4, 2000, pp 968-973, ISTS 2000-e-20.
  87. Pandey K M, Redesign of solar cookers: An overview, International Conference on Energy Storage Technology and Systems (ICOESTS), School of Energy and Environmental Studies, Devi Ahilya University, Khandwa Road, Indore, Feb 1-4, 1999.
  88. Pandey K M, Experimental studies on influence of flow development in sudden expansion: a comparison between supersonic and subsonic flow regime, 8th International Symposium on Flow Visualization, Sorrento (NA), Italy, Sept 1-4, 1998.
  89. Pandey K M, Influence of cavities on flow development in sudden expansion: a case study in supersonic flow regime, Flucom ’97 Fifth Triennial International Symposium in Tokyo Sept 1-4, 1997.
  90. Pandey K M, Pressure loss in flow through nozzles with sudden expansion: a comparison between supersonic and subsonic flow regime, International Conference on Advances in Mechanical and Industrial Engg, Dept of Mechanical and Industrial Engg., Roorkee, India, Feb 6-8, 1997, pp 417-426, Ajay printers and publishers, Roorkee, India, Volume 2 ISBN- 81-86463-15-1
  91. Pandey K M, Base flow behaviour in sudden expansion: a comparison between supersonic and subsonic flow regime 20th International Symposium on Space Technology and Science, Tokyo, May 1996, ISTS 1996-d-11.
  92. Pandey K M, Studies on flow through nozzles in sudden expansion with passive control, International conference at IISc, Bangalore on recent advances in Mechanical Engineering, Dec 20-22, 1995, pp 1511-1518, Narosa publications, New Delhi, India, 1996, Volume 2 ISBN- 81-7319-089-5
  93. Pandey K M, Rathakrishnan E and Oberai M. M, Studies on flow development in flow through nozzles in sudden expansion with passive control, accepted in 19th International Symposium on space technology and science, May 15-24, 1994, Yokohama, Japan, ISTS 1994-d-10.
  94. Pandey K M, Studies on variation of pressure and lift coefficient as function of angle of attack using vortex based panel method for Jukowski aerofoil, International Conference on Computational Methods in Engineering, Nov 11-13, 1992, Singapore.

  1. Gupta, S. and Misra, R.D., “Study on flow boiling critical heat flux enhancement of Al2O3/water nanofluid”, Indian Society for Heat and Mass Transfer Conference (IHMTC), 2017, pp. 1735-1741, DOI: 10.1615/IHMTC-2017.2410
  2. Sarmah, A., Ravi Shankar M., and Misra, R.D., “Preparation and Rheological Characterization of Thermally Responsive Bio-Nano-Composite Hydrogels based Injectable Orthopaedic Scaffolds”, Accepted for poster presentation in the 6th Asian Biomaterials Congress (ABMC6), to be held in Thiruvananthapuram during October 25-27, 2017.
  3. Wangikar, S.S., Patowari, P.K., and Misra, R.D., “Parametric Optimization for Photochemical Machining of Copper using Overall Evaluation Criteria”, Accepted for oral presentation in the 7th International Conference on Materials Processing and Characterization (SMT30), to be held at Gokaraju Rangaraju Institute of Engineering and Technology, Bachupally, Hyderabad, during March 17 – 19, 2016.
  4. Wangikar, S.S., Patowari, P.K., and Misra, R.D., “Effect of Process Parameters on Surface Characteristics of Photochemically Machined Copper Microchannel”, In the Proceedings of the 30th International Conference on Surface Modification Technologies (SMT30), June 29 – July 02, 2016, Milan, Italy.
  5. Misra, R.D. and Goswami, J., “Design and Development of a Heating- Cooling Belt using Thermoelectric Refrigeration for Medical Purposes”, In the Proceedings of the International Conference on Industrial Engineering Science and Applications – 2014 (IESA-14), April 02 - 04, 2014, NIT Durgapur, India.
  6. Misra, R.D. and Rupesh, P.L., “Experimental and computational evaluation of temperature difference of a cascade condenser of R134a-R23 cascade refrigeration system”, Accepted in the 3rd International Symposium on the Fusion Technologies (ISFT-2014), July 30-Aug 3, 2014, Jeonju City, South Korea.
  7. Misra, R.D. and Rupesh, P.L., “Thermodynamic analysis of R134a-R23 cascade refrigeration system”, Accepted in the International Mechanical Engineering Congress (IMEC -2014), June 13-15, 2014, NIT Trichy, Paper No. IMEC 2014 - A – 050.
  8. Sarma, N., Biswas, A. and Misra, R.D., “Experimental and CFD analyses of two bladed savonius water turbine under low velocity conditions", In the ASME 2014 Power Conference, Baltimore, Maryland, USA, July 28-31, 2014, Paper No. Power2014-32232
  9. Patowari, P.K., Wangikar, S.S., Misra, R.D., Misal, N.D., “A Parametric Study on Photochemical Machining of Brass with Ferric Chloride as Etchant”, In the Proceedings of the International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-8: 2013), NIT Calicut, Kerala, India, Dec. 13-15, 2013, pp 451-456.
  10. Misra, R.D. and Jena, J., 2012, " Thermoeconomic Optimization of an Aqua-Ammonia Vapour Absorption Refrigeration System using Structural Method”, In the Proceedings of the International Conference on “Emerging Trend in Engineering & Technology: MATLAB Applications in Engineering & Technology”, in Singapore, Feb. 24-25, pp. 104-111.
  11. Misra, R.D., Mahakud, J., and Jena, J., 2012, " Exergy Analysis for Biomass Co-Firing Coal Fuel Based Thermal Power Plant”, In the Proceedings of the International Conference on “Emerging Trend in Engineering & Technology: Mechanical & Industrial Engineering”, in Singapore, Feb. 23-24, pp. 64-70.
  12. Misra, R.D. and Murthy, M.S., 2011, "Comparative Performance Evaluation of Karanja Vegetable oil and Karanja Biodiesel Blends with Diesel in C.I. Engine”, In the Proceedings of the International Conference on “2011 IEEE First Conference on Clean Energy and Technology CET”, in Kuala Lumpur, Malaysia, June 27-29.
  13. Dubey, M., Rajput, S.P.S., Misra, R.D. and Nag, P.K., “Exergy Analysis of a Coupled Power-Refrigeration Cycle”, Accepted for presentation in the 23rd International Conference on “Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010)”, to be held in Lausanne, Switzerland, during June 14-17, 2010.
  14. Misra, R.D. and Kalita, N., “CFD Analysis of a Room with one Window Air Conditioner with Experimental Validation”, Accepted for presentation in the 23rd International Conference on “Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010)”, to be held in Lausanne, Switzerland, during June 14-17, 2010.
  15. Dubey, M., Rajput, S.P.S., Misra, R.D. and Nag, P.K., 2009, "Energy Analysis of a Coupled Power and Refrigeration Cycle", Proceedings of the International Conference on Simulation Modelling and Analysis (COSMA 2009), NIT Calicut, Calicut, December 17-19, 2009, pp. 426-431.
  16. Dubey, M., Rajput, S.P.S., Misra, R.D. and Nag, P.K., 2009, "Exergetic Modeling of a Coupled Power-Refrigeration Cycle ", Proceedings of the International Conference on Simulation Modelling and Analysis (COSMA 2009), NIT Calicut, Calicut, December 17-19, 2009, pp. 404-409.
  17. Murthy, M.S., and Misra, R.D., 2009, "Corn Based Ethanol vs. Cellulosic Ethanol”, In the Proceedings of the International Conference on “Advances in Mechanical and Building Sciences In the 3rd Millennium (ICAMB– 2009)”, Dec. 14-16, 2009.
  18. Murthy, M.S. and Misra, R.D., 2009, "Strategic policies and keys issues for sustainable development of bio fuels”, In the Proceedings of the International Conference on “Advances in Mechanical and Building Sciences In the 3rd Millennium (ICAMB– 2009)”, Dec. 14-16, 2009.
  19. Mukherjee, P., Patowari, P.K., and Misra, R.D., 2009, “Analysis of Temperature Distribution during Electro Discharge Machining Process and Its Effect”, Proceedings of the Sixth International Conference on “Precision, Meso, Micro and Nano Engineering”, Jay Raja et al. Ed., PSG College of Technology and Amrita Vishwa Vidyapeetham (University), Coimbatore, pp. G-1:G-6, December 11-12, 2009.
  20. Dubey, M., Rajput, S.P.S., Misra, R.D. and Nag, P.K., 2009, "Exergetic Modeling of a Coupled Power-Refrigeration Cycle", Proceedings of the Indo-Italian Conference on Emerging Trends in Waste Management Technologies (ETWMT-09), S.N. Kaul, et al., eds., MAEER’s MIT College of Engineering, Pune & Maharashtra Institute of Technology, Pune, December 03-04, 2009, pp. 476-488.
  21. Misra, R.D. and Sahoo, P.K., 2009, "Thermoeconomic Optimization of a single effect H2O/LiBr Absorption Chiller System Using Evolutionary Programming", Proceedings of the Fourth International Exergy, Energy and Environment Symposium (IEEES-4), AUS, Sharjah, UAE, April 19-23, 2009.
  22. Misra, R.D. and Murthy, M.S., 2007, "Energy analysis of an operational 500 MW coal fuel based thermal power plant”, In the Proceedings of the International Conference ‘Thermal Power India-II on Coal, Gas, Oil and Nuclear’, Gulmohar Hall, India Habitat Centre, Lodhi Road, New Delhi 110003, Dec. 11-12, 2007.
  23. Sahoo, P.K. and Misra, R.D., 2005, "Thermoeconomic Evaluation and Optimization of a Water-Ammonia Vapour-Absorption Refrigeration System using Evolutionary Programming”, Proceedings of the 18th International Conference on “Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2005)”, S. Kjelstrup et al., eds., NTNU, Tapir Academic Press, Trondheim, Norway, June 20-22, pp. 935-943.
  24. Misra, R.D., Sahoo, P.K., and Gupta, A., 2005, "Thermoeconomic Optimization of a Double-Effect H2O/LiBr Vapour-Absorption Refrigeration System using the Exergetic Cost Theory”, Proceedings of the 18th International Conference on “Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2005)”, S. Kjelstrup et al., eds., NTNU, Tapir Academic Press, Trondheim, Norway, June 20-22, pp. 477-484.
  25. Misra, R.D., Sahoo, P.K., and Gupta, A., 2003, "Exergoeconomic Evaluation of a Vapour-Compression Refrigeration System," Proceedings of the International Conference on "Emerging Technologies in Airconditioning and Refrigeration", R. S. Agarwal et al., eds., Allied Publishers Limited, New Delhi, Sept. 8-10, pp. 149-159.
  26. Sahoo, P.K., Misra, R.D., and Gupta, A., 2003 "Exergoeconomic Optimization of an Aqua-Ammonia Absorption Refrigeration System", Proceedings of the First International Exergy, Energy and Environment Symposium (IEEES-1), I. Dincer and A. Hepbasli eds. Ege University, Izmir, Turkey, July 13-17, paper no. 46, pp. 287-292.
  27. Sahoo, P.K., Chand, S., and Misra, R.D., 2003, "Thermoeconomic Optimization of a Cogeneration System using Evolutionary Programming", Proceedings of the First International Exergy, Energy and Environment Symposium (IEEES-1), I. Dincer and A. Hepbasli eds. Ege University, Izmir, Turkey, July 13-17, paper no. 45, pp. 281-286.
  28. Misra, R.D., Sahoo, P.K., and Gupta, A., 2002, "Exergoeconomic Evaluation and Optimization of a Solar Sorption System for Air Conditioning", Proceedings of the International Conference on Recent Advances in Solar Energy Conversion Systems (ICSECS, 2002), Sarviya R.M. et al. eds. Department of Mechanical Engineering & Energy Centre, M.A.N.I.T. Bhopal, India, September 28-29, pp. 115-125.
  29. Misra, R.D., Sahoo, P.K., and Gupta, A., 2001, "Optimization of a LiBr/Water Vapour Absorption Refrigeration System based on Exergetic Cost Analysis," Proceedings of the International Conference on "Emerging Technologies in Airconditioning and Refrigeration", R. S. Agarwal et al., eds., Allied Publishers Limited, New Delhi, Sept. 26-28, pp. 225-239.

  1. Binoy Kumar Baroi, Tapas Debnath, and Promod Kumar Patowari. "Machinability assessment of titanium grade 2 alloy using deionized water in EDM." International Conference on Material Processing and Characterization ICMPC 2020, GLA University, Materials Today: Proceedings (2020). https://doi.org/10.1016/j.matpr.2020.02.482
  2. Tapas Debnath, Binoy Kumar Baroi, Jagadish and Promod Kumar Patowari, “Machinability study of SS-430 using tap water in EDM”, International Conference on Material Processing and Characterization ICMPC 2020, GLA University, Materials Today: Proceedings, (2020), Elsevier, https://doi.org/10.1016/j.matpr.2020.02.475.
  3. Siddhartha Kar, Pallab Sarmah and Promod Kumar Patowari “Micro electrical discharge milling of titanium: Effects of voltage and tool rotation speed”. International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2020), February 07-09, 2020, NIT Silchar.
  4. Pallab Sarmah, Tapas Debnath, Promod Kumar Patowari, “Machinability study of natural rubber using ultrasonic machining”, International Conference on Recent Advancement in Mechanical Engineering, ICRAME 2020, National Institute of Technology Silchar, 07-09 February 2020.
  5. Gaijinliu Gangmei, Jaswant Kumar, Tapas Debnath, and P.K. Patowari, “Parametric Optimization of Stainless Steel AISI (SS-430) using Photochemical Machining”, International Conference on Recent Advancement in Mechanical Engineering, ICRAME 2020, National Institute of Technology Silchar, 07-09 February 2020.
  6. Jaswant Kumar, Tapas Debnath, and Promod Kumar Patowari, “Assessment of selective etching on Aluminium 6068 using PCM”, International Conference on Recent Advancement in Mechanical Engineering, ICRAME 2020, National Institute of Technology Silchar, 07-09 February 2020.
  7. Binoy Kumar Baroi, Tapas Debnath and Promod Kumar Patowari, “Parametric analysis for the machining of Titanium Grade-II using tap water in EDM”, International Conference on Recent Advancement in Mechanical Engineering, ICRAME 2020, National Institute of Technology Silchar, 07-09 February 2020.
  8. A. K. Singh, T. J. Singh, R. Pongen, P. K. Patowari, “Multi-optimization of µ-EDMed arrayed micro rods using grey relational analysis”, International Conference on Recent Developments in Mechanical Engineering (ICRAME 2020), 07-09 February 2020, NIT Silchar, India.
  9. Trishna Bhattacharya, Abhishek Singh, Nitin Pratap Singh, Siddhartha Kar and Promod Kumar Patowari (2019) “Micro drilling of stainless steel by micro electrical discharge machining and its parametric optimization”, International Conference on Precision, Meso, Micro & Nano Engineering (COPEN-11), December 12-14, 2019, IIT Indore, Madhya Pradesh, India.
  10. E. Tripathi, P. K. Patowari, S. Pati, Fabrication of spiral micromixer using mold machined by CO2 assisted laser machine, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN -11), December 12-14, 2019, IIT Indore, Indore, India.
  11. Bappa Mondal, Sukumar Pati, Promod Kumar Patowari, Assessment of mixing in microchannel with obstacles, Proceedings of International Conference on Energy and Sustainable Development (ICESD 2020) at Jadavpur University, Kolkata, West Bengal, India, February 14-15, 2020, Paper No:72. ISBN 978-93-83660-56-8
  12. Bappa Mondal, Sukumar Pati, Promod Kumar Patowari, Fabrication of wavy micromixer using soft lithography technique, 10th International Conference on Materials, Processing & Characterization (ICMPC 2020) at GLA University, Mathura, Uttar Pradesh India, February 21-23, 2020, Paper No: MATPR-D-20-00216R1. https://doi.org/10.1016/j.matpr.2020.02.254
  13. Bappa Mondal, Sukumar Pati and Promod Kumar Patowari, Effect of confluence angle between inlets on the mixing characteristics in microchannel, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP) 2018, IIT Bombay, Mumbai, December 10-12, 2018.
  14. Rahul Ranjan, Siddhartha Kar and Promod Kumar Patowari, Parametric Optimization of Drilling on Titanium Grade-2 in Die-Sinking Electrical Discharge Machining, 2nd International Conference on Advanced Technologies for Societal Applications (Techno-Societal 2018), SVERI, Pandharpur, Maharashtra, December 14-15, 2018.
  15. Pallab Sarmah, Tapas Debnath, Promod Kumar Patowari, Fabrication of ultrathin sheet using wire-EDM, 2nd International Conference on Advanced Technologies for Societal Applications (Techno-Societal 2018), SVERI, Pandharpur, Maharashtra, December 14-15, 2018.
  16. Siddhartha Kar and Promod Kumar Patowari, Parametric optimization of micro electrical discharge drilling on titanium, 7th International and 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018), Anna University, Chennai, December 13-15, 2018.
  17. Tapas Debnath, Keshob Kumar Patra and Promod Kumar Patowari, Gang Drilling of Square micro-Holes on Glass Using USM, 7th International and 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018), Anna University, Chennai, December 13-15, 2018.
  18. Siddhartha Kar, Pallab Sarmah, Binoy Kumar Baroi and Promod Kumar Patowari, Drilling of micro holes in titanium using micro EDM: A parametric investigation, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, Shillong, November 8-10, 2018.
  19. Tapas Debnath and Promod Kumar Patowari, Drilling an array of square micro holes using micro-EDM, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, Shillong, November 8-10, 2018.
  20. Tapas Debnath, Sumit Kumar Mehta and Promod Kumar Patowari, Performance analysis of an array of square micro-fins, IOP Conf. Series: Materials Science and Engineering 377, pp. 012056, International Conference on Mechanical Materials and Renewable Energy (ICMMRE - 2017), SMIT, Sikkim, 2018, https://doi.org/10.1088/1757-899X/377/1/012056.
  21. Sandeep Sitaram Wangikar, Promod Kumar Patowari and Rahul Dev Misra, Parametric Optimization for Photochemical Machining of Copper using Overall Evaluation Criteria, Materials Today: Proceedings, 5, 4736–4742, 7th International Conference of Materials Processing and Characterization (ICMPC), GRIET, Telangana, March 17-19, 2017, https://doi.org/10.1016/j.matpr.2017.12.046
  22. Binoy Kumar Baroi, Siddhartha Kar and Promod Kumar Patowari, Electric discharge machining of titanium grade 2 alloy and its parametric study, Materials Today: Proceedings, 5 (2), 5004-5011, 7th International Conference of Materials Processing and Characterization (ICMPC), GRIET, Telangana, March 17-19, 2017, https://doi.org/10.1016/j.matpr.2017.12.078
  23. Ambarish Maji, Dipankar Bhanja and Promod Kumar Patowari, Computational investigation and optimization of heat transfer enhancement through perforated pin fins of different dimensions, Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), 1545-1550, December 27-30, 2017, BITS Pilani, Hyderabad, http://dx.doi.org/10.1615/IHMTC-2017.2140
  24. Siddhartha Kar, Promod Kumar Patowari, “Machining of Micro Slots in Titanium using Micro Electrical Discharge Milling”, 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Dec 07-09 2017, IIT Madras, 2017, Proceedings of COPEN 10, pp 214-217.
  25. T. Debnath, A. Haashir, P. K. Patowari, “Parametric Study of Micro-hole Drilling in Glass using Ultrasonic Machining”, 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Dec 07-09 2017, IIT Madras, 2017, Proceedings of COPEN 10, pp 627-630.
  26. S. S. Wangikar, P. K. Patowari, R. D. Misra, “Parametric Optimization for Photochemical Machining of Copper using Grey Rational Method”, International conference on Advanced Technologies for Societal Applications (Techno-Societal 2016), 20 -21 December 2016, at SVERI’s College of Engineering, Pandharpur, Maharashtra, Techno-Societal 2016 Proceedings of the International Conference on Advanced Technologies for Societal Applications, Springer International Publishing AG, 2018, pp. 933-943.
  27. S. S. Wangikar, P. K. Patowari, R. D. Misra, “Parametric Optimization for Photochemical Machining of Copper using Overall Evaluation Criteria” accepted for the International Conference on Materials Processing and Characterization (ICMPC 2017), March 2017, at Hyderabad, India.
  28. A. Maji, D. Bhanja, P.K. Patowari, G. Choubey and T. Deshamukhya, ‘Computational Investigation of Heat Transfer Analysis through Perforated Pin Fins of Different Materials’, International on Functional Materials, Chatacterization, Solid State Physics, Power, Thermal and Combustion Energy (FCSPTC) AIP Conference Proceedings, 1859, 020009 (2017).
  29. Dibya Jyoti Borah, P. K. Patowari, A. A. Likhite, “Machinability Study of Austempered Ductile Iron Using Wire Electrical Discharge Machining”, 30th International Conference on Surface Modification Technologies (SMT30), June 29th – July 1st, 2016, Politechnico de Milano, Milan, Italy
  30. S. S. Wangikar, P. K. Patowari, R. D. Misra, “Effect of Process Parameters on Surface Characteristics of Photochemically Machined Copper Microchannel” 30th International Conference on Surface Modification Technologies (SMT30), June 29th – July 1st, 2016, Politechnico de Milano, Milan, Italy
  31. Sankha Shuvra Das, Binay Kumar Patawari, P.K. Patowari, S Halder, “Computational Analysis for Mixing of Fluids Flowing through Micro-Channels of Different Geometries”, Proceedings of AIMTDR-2014 conference at IIT Guwahati, during 12-14 December 2014.
  32. P. K. Patowari, M. Rahang, “Grid Pattern Generation by Selective Material Deposition using Masking Technique in EDM”, Proceedings of the 28th International Conference on Surface Modification Technologies, June 16th – 18th, 2014, Tampere University of Technology, Tampere, Finland, pp 361-374.
  33. Singh A.K., Patowari P.K. and Deshpande N.V., “Fabrication of Micro Tool using Reverse-Micro EDM”, Proceedings of International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013), December 13th-15th, 2013, NIT Calicut, Kerala, India, pp 218-221.
  34. Rahang M. and Patowari P.K., “Multiple Lines Deposition using Selective Masking Technique in Electro Discharge Machine (EDM)”, Proceedings of International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013), December 13th-15th, 2013, NIT Calicut, Kerala, India, pp 667-672.
  35. Patowari P.K., Wangikar S.S., Misra R.D. and Misal N.D., “A Parametric Study on Photochemical Machining of Brass with Ferric Chloride as Etchant”, Proceedings of International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013), December 13th-15th, 2013, NIT Calicut, Kerala, India, pp 451-456.
  36. P.K. Patowari, M. Eswara Krishna, Shubhajit Das and Sourav Nath, “Performance of Powder Metallurgy Tools in EDM for Surface Modification”, Proceedings of 4th International and 25th AIMTDR 2012 held at Production Engineering Department, Jadavpur University, Kolkata,- 700032, during December, 14-16 2012 pp 792-795.
  37. P.K. Patowari, G. Dutta, K. Kalita, G.C.T. Reddy, S.K. Saikia, H. Kalita, “Design, Analysis and Comparison of Multilayer Electro Thermal Micro Actuators for MEMS Application”, 6thSASTech 2012, Kuala Lumpur, Malaysia, during March 24-25, 2012.
  38. M. Eswara Krishna and P.K. Patowari, “Development of a 3D Process Model for EDM using Powder Metallurgical Compact Electrodes for Surface Modification”, International Conference on Computational Methods in Manufacturing (ICCMM2011), Indian Institute of Technology Guwahati, Assam, India. December 15-16, 2011, pp 377-384.
  39. P.K. Patowari, J. Saikia, P.S. Chatterjee, A. Ramachandran, Ashwin P.G. and S. Baishya, “Analysis of a Comb Type Microactuator Used in Micro Thermal Switches”, World Congress on Engineering 2011 (WCE 2011), London, U.K., July 6-8, 2011, pp 1471-1474.
  40. Gogoi D.J., Patowari P.K., Barthakur A., Talukdar P., Sharma M. “Training of an Industrial Manipulator Using a Trainer Arm”, Proc. of 3rd International and 24th AIMTDR Conference, Andhra University,Visakhapatnam, December 13-15, 2010 pp 591-596.
  41. Patowari P.K., Nath M.M., Bharali A.S., Gogoi J., Singh C.K. “Comparative Study of Different Micro-Thermal Actuators for MEMS Application”, Proc. of 3rd International and 24th AIMTDR Conference, Andhra University,Visakhapatnam, December 13-15, 2010 pp 425-428.
  42. P.K. Patowari, A.S. Bharali, M.M. Nath, J. Gogoi, C.K. Singh, S. Baishya, “Analysis of a Monometallic Two Arm Horizontal Thermal Actuator for MEMS”, Proc. of 2010 2nd International Conference on Mechanical and Electronics Engineering (ICMEE 2010), Kyoto, Japan, August 1-3, 2010, pp V1-184- V1-188.
  43. Anup Kumar Bharali P.K. Patowari S. Baishya, “Design and Analysis of Multilayer Electrothermal Actuator for MEMS” Proc. of 2010 2nd International Conference on Mechanical and Electronics Engineering (ICMEE 2010), Kyoto, Japan, August 1-3, 2010, pp V1-127- V1-131.
  44. Patowari P.K.,Barua S., Das S., Patir R., Deka D., “Analysis of Submerged Arc Welding Process with the Application of Taguchi Method”, Proc. of Sixth International Conference on Precision, Meso, Micro and Nano-Engineering (COPEN-6), PSG College of Technology and Amrita School of Engineering, Coimbatore, Tamilnadu, India, December 11-12, 2009, pp J-27-J-31.
  45. Mukherjee P., Patowari P.K., Misra R.D., “Analysis of Temperature Distribution During Electric Discharge Machining Process and its Effect”, Proc. of Sixth International Conference on Precision, Meso, Micro and Nano-Engineering (COPEN-6), PSG College of Technology and Amrita School of Engineering, Coimbatore, Tamilnadu, India, December 11-12, 2009, pp G-1-G-6.
  46. Patowari P.K., Saha P., Mishra P.K., “A Qualitative and Quantitative Analysis of Deposited Layer on C-40 Steel Treated with W-Cu P/M Electrodes in EDM”, Proc. of 2nd International & 23rd All India Manufacturing Technology Design & Research (23rd AIMTDR) conference, IIT Madras, Chennai, India, December 15-17, 2008, pp201-207.
  47. Patowari P.K., Saha P., Mishra P.K., “Characterization of the Layer Deposited on C40 Steel using W-Cu P/M Sintered Electrodes in EDM”, Proc. of International Conference on Precision, Meso, Micro and Nano-Engineering (COPEN-2007), College of Engineering, Trivandram, India, December 13-14, 2007, pp 143-148.
  48. Patowari P.K., Mishra U.K., Saha P. , Mishra P.K., “Surface Modification of C-40 Steel using WC-Cu P/M Green Compact Electrodes in EDM” Proc. of First International & 22nd All India Manufacturing Technology Design & Research Conference (22nd AIMTDR), IIT Roorkee, India, December 21-23, 2006, pp 875-879.
  49. Patel D.M., Patowari P.K., Saha P., “Surface Micro Texturing of Sintered Ceramic by KrF Excimer Laser” Proc. of First International & 22nd All India Manufacturing Technology Design & Research Conference (22nd AIMTDR), IIT Roorkee, India, December 21-23, 2006, pp 985-990.



  1. K.M.Pandey and P.L.Choudhary, Nuclear waste disposal and the effects on ground water pollution, presented in National workshop on engineering materials and equipments, NIT Silchar and Institute of public health engineers, India, Feb.15-16, 2008.
  2. K.M.Pandey, P.L. Choudury and N.Pradeep Kumar, Transient analysis of a thin film lubricated journal bearing at 1500 rpm, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  3. K.M.Pandey, P.L.Choudhury and A.K.Singh, CFD analysis of journal bearing of steam turbine for 210 MW power output , Proceedings of IMECE2010, 2010 ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada (IMECE10-37500).
  4. K.M.Pandey, P.L.Choudhury and A.K.Singh, CFD analysis of horizontal axis wind turbine, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  5. Choudhury, P., Sriram, P., and Sivakumar, S.M. “On suppression of mixed–mode edge delamination in composite laminates” Procedings of Indo-Japan Conference on Damage Tolerance Design and Materials, IIT Madras, India, 2004.

  1. Singh A., Manikandan A., Sankar M.R., Pakshirajan K., Roy L. (2020) Empirical Modelling and Optimisation of Bio-Micromachining on Antimicrobial Copper to Fabricate Micromixing System. In: Shunmugam M., Kanthababu M. (eds) Advances in Unconventional Machining and Composites. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore
  2. Abhishek Singh,N. Arul Manikandan, Mamilla Ravi Sankar, K. Pakshirajan, L. Roy, “Experimental Investigation and Surface Morphology of Bio-Micromachining on Copper”8th International Conference of Materials Processing and Characterization (ICMPC), 17−19 March, 2018, GRIET Hyderabad, India.
  3. Abhishek Singh,N. Arul Manikandan, Mamilla Ravi Sankar, K. Pakshirajan, L. Roy,“Development of nozzle feature on copper surface by bio-micromachining” International Conference on Manufacturing Technology and Simulation (ICMTC), 07−08 July, 2017, IIT Madras, Chennai, India.(BEST PAPER AWARD).
  4. L. Roy and S.K. Kakoty ,”Application of Genetic Algorithm in Optimization of Hydrodynamic Bearings” 4th International conference on Soft Computing for Problem Solving (SocProS 2014) Dec. 27-29, 2014 NIT SILCHAR, ASSAM, INDIA
  5. L. Roy and S. K. Kakoty, “Stability and flow optimized bearing configuration of two groove bearing.”, ISTAM, 58th Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM), 18-21 December, 2013,BESU,SIBPUR (full paper published in proceedings of the said conference)
  6. L. Roy, “Axial Grooved Oil Journal Bearing Analysis with Thermohydodynamic Consideration” International Conference & Exhibition on Total Engineering, Analysis and Manufacturing Technologies October (4-6 ) 2007,pp 62

  1. Kumar S., Sharma K.K., Biswas A., Sinha N., Chopde D. Parametric study of the performance of a parabolic trough collector with absorber surface coating for the meteorological conditions of North-East. International conference on Smart Technologies for Energy, Environment & Sustainable Development (ICSTEESD-20), 04-05 December 2020, G H Raisoni College of Engineering, Nagpur, India.
  2. Sarma N.K., Biswas A., Misra R.D. Comparative Assessment of Savonius Water Turbine With Conventional Savonius Wind Turbine. Proceedings of the ASME 2019 Gas Turbine India GTIndia2019, December 5-6, 2019, Chennai, Tamil Nadu, India. Paper No. GTINDIA2019- 2459.
  3. Karmakar A., Biswas A., Philip J.T., Kuriachen B. Estimation of Heat Loss Factor with the Tilt Angle in a Solar Thermal Flat-Plate Collector. Proceedings of the Int. Conf. on Green Buildings & Sustainable Engineering (GBSE 2018). DOI: 10.1007/978-981-13-1202-1_6, January 2019
  4. Das M., Singh M.A., Biswas A., Sharma K.K. Design and analysis of hybrid renewable energy system: A review. AIP Conference Proceedings 1998, 020007 (2018); doi: 10.1063/1.5049103.
  5. Mazarbhuiya H.M.S.M., Biswas A., and Das Biplab, (2016). Performance characteristics of simple H-Darrieus vertical axis wind rotor. Published in the conference proceedings ICEMS-2016, Jaipur, India. ISBN: 978935254230.
  6. Singh M.A, Biswas A. Sharma K.K. Solar Power Potential of North-East India- A Case Study for Silchar. AIP Conference Proceeding & Proceeding of International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS), p 7-12, 22nd & 23rd December 2017, Secunderabad, Telangana, India. AIP Conference Proceedings 1952, 020002 (2018); doi: 10.1063/1.5031964 (Scopus).
  7. Mazarbhuiya H.M.S.M, Biswas A., Sharma K.K. Performance Prediction of Asymmetrical Bladed H-Darrieus VAWT rotors in Low Wind Speed Conditions using CFD. AIP Conference Proceeding & Proceeding of International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS), p 282-285, 22nd & 23rd December 2017, Secunderabad, Telangana, India. AIP Conference Proceedings 1952, 020040 (2018); https://doi.org/10.1063/1.5032002 (Scopus).
  8. Basumatary M., Biswas A., Misra R.D. Computational Study on Development of Modified Vertical Axis Water Turbine” AIP-ICRTES Conference, 10th &11th Feb 2018 Visakhapatnam, Andhra Pradesh, India (accepted).
  9. Basumatary M., Biswas A., Misra R.D. Performance Investigations on modified Vertical Axis Water Turbine: Combination of Lift and Drag. AIP Conference Proceeding & Proceeding of International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS), p 392-397, 22nd & 23rd December 2017, Secunderabad, Telangana, India. AIP Conference Proceedings 1952, 020054 (2018); https://doi.org/10.1063/1.5032016 (Scopus).
  10. Sengupta A.R., Biswas A., Gupta R. Experimental analysis of a high solidity cambered blade H-rotor in low wind streams. 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), 15-17 December 2016, NIT Allahabad, India
  11. Pushan S., Biswas A. CFD analysis of tea withering with and without effect of solar radiation. 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), 15-17 December 2016, NIT Allahabad, India.
  12. Singh M.A, Biswas A. Sharma K.K. Solar Power Potential of North-East India- A Case Study for Silchar. AIP Conference Proceeding & Proceeding of International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS), p 7-12, 22nd & 23rd December 2017, Secunderabad, Telangana, India.
  13. Mazarbhuiya H.M.S.M, Biswas A., Sharma K.K. Performance Prediction of Asymmetrical Bladed H-Darrieus VAWT rotors in Low Wind Speed Conditions using CFD. AIP Conference Proceeding & Proceeding of International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS), p 282-285, 22nd & 23rd December 2017, Secunderabad, Telangana, India.
  14. Basumatary M., Biswas A., Misra R.D. Performance Investigations on modified Vertical Axis Water Turbine: Combination of Lift and Drag. AIP Conference Proceeding & Proceeding of International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS), p 392-397, 22nd & 23rd December 2017, Secunderabad, Telangana, India
  15. Sengupta A.R., Biswas A., Gupta R. Experimental analysis of a high solidity cambered blade H-rotor in low wind streams. 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), 15-17 December 2016, NIT Allahabad, India
  16. Sarma, N.K., Biswas, A. and Misra, R.D., “Experimental and CFD analyses of two bladed Savonius water turbine under low velocity conditions". In: Proceedings ASME 2014 Power Conference, Baltimore, USA, July 28-31, 2014, Paper No. Power 2014-32232. Vol 2, pp. V002T10A009; 10 pages; doi: 10.1115/POWER2014-32232. ISBN: 978-079184609-4.

  1. Jialai Wang, Sudipta Halder, Fang, Guangping Lin, Novel Encapsulation Technology for Energy Efficient Building Materials and Self-Healing of Concrete, JEC-Chicago, USA, 2017
  2. Nazrul Islam Khan, Sudipta Halder, Subhankar Das, M.S. Goyat, Parametric influence towards size reduction of poly(methylmethacrylate) shelled microcapsule with epoxy core, Materials Today Proceeding (ICMS 2017).
  3. Subhankar Das, Sudipta Halder, Effect of oxidation and silanization of C60 on the tensile and dynamic mechanical behavior of epoxy nanocomposites, The 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV) during 5th to 7th November 2016.
  4. Nazrul Islam Khana, Sudipta Halder, M.S. Goyat, Effect of emulsifier on the properties of capsules for fabricating healing enabled next generation adhesive joints, 30th International Conference on Surface Modification Technologies (SMT30), 29th June – 1st July, 2016, Milan, Italy.
  5. Ikbal Choudhury, Sudipta Halder, Abhinav Mathur, Writuparna Nath, Aniruddha Phukan “Synthesis of self-healing thermosetting resin based capsules and their related complexities”, MIMT 2015: 6th International Conference on Mechanical, Industrial, and Manufacturing Technologies, March 6-7, 2015, Melaka, Malaysia.
  6. Choudhury, I., Mathur, A., Phukan, A., Nath, W., and Halder, S., “Preparation and Characterization of self-healing polymer matrix”, MACRO 2015, International Symposium on Polymer Science and Technology, Kolkata, India, Jan 23-26, 2015.
  7. Tankeshwar Prasad, Sudipta Halder, Optimization of Parameters and its Effect on Size of ZnO Nanoparticles Synthesized by Sol-gel Method, SocproS-2014, NIT Silchar.
  8. Choudhury, I., Mathur, A. and Halder, S., “Determination of elastic behavior of self-healing composites using mathematical models”, Proceedings of the International Conference on Research and Scientific Innovation (RSIS), Ahmedabad, India, 22nd Dec 2013.
  9. Sudipta Halder, P.K. Ghosh, Mechanism of nanoparticle dispersion via acoustic cavitation in highly viscous fluid, iNaCoMM 2013, IIT Roorkee.
  10. Subhankar Das, Pannalal Chowdhury, Sudipta Halder, Stress and Free Edge Delamination Analyses of Delaminated Composite Structure using ANSYS, International Conference On DESIGN AND MANUFACTURING, IConDM, 2013, Chennai.
  11. Sudipta Halder, P K Ghosh and M S Goyat, Lap shear behavior of ZrO2 nanoparticle reinforced epoxy adhesive cured at different temperatures, International Conference on Recent Advances in Composite Materials (ICRACM-2013), Goa.
  12. Sudipta Halder, A K Pandya, A Mitra, Crystallization behavior and Curie temperature of Co doped Nd-Fe-B based Nanocomposite Permanent Magnet, National Metallurgical’s Day, International Symposium on Converting Challenges into Opportunities: Iron and Steel-2012, jamshedpur.
  13. Sudipta Halder, A K Pandya, A Mitra, A Basu Mallic, Crystallization behavior and Curie temperature Properties of Al doped Nd-Fe-B based Nanocomposite Permanent Magnet, International Conference on Advances in Materials and Processing-2012, IIT Roorkee.
  14. S. Sakthivel, Sudipta Halder, P. D. Gupta and N.K.Agnihotra, Bio-fuel from Used Vegetable (cooking) Oil in Middle East, Qatar Foundation Annual Research Forum, 2011, Qatar.
  15. Sudipta Halder, M.S. Goyat, and P.K. Ghosh, Micro-structural study of tensile mirror zone and its effect on mechanical properties of SiO2/epoxy nanocomposite, National conference on Micrstructure-2011, IIT Roorkee.
  16. Sudipta Halder, Abhishek kar, Ashish chanda, Vishal Kemprai, Purnajyoti Dey, Kushal Kachari, Mechanism of nanoparticle dispersion via acoustic cavitation in highly viscous fluid, iNaCoMM 2013, IIT Roorkee (Accepted).
  17. Amitava Roy, Pawan Singh Negi, Sahil Kala, Sushanta Das, Sudipta Halder, The Design and Analysis of a Buggy Roll Cage, International Conference On DESIGN AND MANUFACTURING, IConDM 2013 (Submitted).
  18. Subhankar Das, Pannalal Chowdhury, Sudipta Halder, Stress and Free Edge Delamination Analyses of Delaminated Composite Structure using ANSYS, International Conference On DESIGN AND MANUFACTURING, IConDM 2013.
  19. Sudipta Halder, P K Ghosh and M S Goyat, Lap shear behavior of ZrO2 nanoparticle reinforced epoxy adhesive cured at different temperatures, International Conference on Recent Advances in Composite Materials (ICRACM-2013).
  20. Sudipta Halder, A K Pandya, A Mitra, A Basu Mallic, Crystallization behavior and Curie temperature Properties of Al doped Nd-Fe-B based Nanocomposite Permanent Magnet, International Conference on Advances in Materials and Processing-2012.
  21. S. Sakthivel, Sudipta Halder, P. D. Gupta and N.K.Agnihotra, Bio-fuel from Used Vegetable (cooking) Oil in Middle East, Qatar Foundation Annual Research Forum, 2011.

  1. S. Debbarma, and R. D. Misra (2017). Theoretical route to predict the heating value of biodiesel. Feb 26-28, 2017, Mohali, India.
  2. Das Biplab, Deb Barma, S., Deb Barma, Sumita, and Lingfa, P. (2008). MesuaFerrea Oil: An Environmental Friendly Alternative Fuel for Diesel Engine. Published online for International Conference on Energy Security and Climate Change: Issues, Strategies, and Options (ESCC 2008) at Sofitel Centara Grand,Bangkok, Thailand, August 6-8, 2008.
  3. Sumita Deb Barma,Swarup Paul, Bijan Sarkar and P. K. Bose. Experimental investigation on Jatropha biodiesel as alternative fuel for IC engine. Published in the proceedings of the International Conference on Advances on Renewable Energy (ICARE-2010), 24-26 June, 2010, at MANIT, Bhopal. M.P., India. ISBN-13 978-81-909984-0-6, p.p. 238-245.
  4. Sumita Deb Barma, Biplab Das and Asis Giri. (2011). Effect of load level on the performance of a biodiesel run dual fuel CI engine using second law analysis. IEEE International Conference and Utility Exhibition 2011 on Power and Energy Systems: Issues and Prospects for Asia (ICUE 2011), Bangkok, Thailand, 28-30 Sept., 2011. http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=6490085

  1. P.K. Mandal, S. Sengupta, S.C. Rana, D. Bhanja, 2019. Effect of orientation angle in thermal performance analysis of a horizontal heat sink of perforated pin fins, AIP Conference Proceedings 2148, 030003 (2019), https://doi.org/10.1063/1.5123925
  2. Md. Zeeshan, V. Kumar, S. Nath, D. Bhanja, 2019. A Numerical Investigation on the Performance of Finned Tube Heat Exchangers Having Alternate Arrangements of Flat and Circular Tubes, International Conference on Applied Physics, Power and Material Science, Journal of Physics: Conf. Series 1172 (2019) 012057 , IOP Publishing, doi:10.1088/1742-6596/1172/1/012057
  3. Ambarish Maji, Dipankar Bhanja, P. K. Patowari, 2017. Computational investigation and optimization of heat transfer enhancement through perforated pin fins of different dimensions, ISHMT Digital Library, Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017). 2017, December 27-30 , BITS Pilani, Hyderabad, India, DOI: 10.1615/IHMTC-2017.2140, pp. 1545-1550.
  4. Ambarish Maji, Dipankar Bhanja, P. K. Patowari, Gautam Choubey, Tuhin Deshamukhya, 2017. Computational investigation of heat transfer analysis through perforated pin fins of different materials, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020009 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990162. (Citation: 1)
  5. Mohd Zeeshan, Saheera Azmi Hazarika, Sujit Nath, Dipankar Bhanja, 2017. Numerical investigation on the performance of fin and tube heat exchangers using rectangular vortex generators, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020011 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990164, (Citation: 5)
  6. Saheera Azmi Hazarika, Mohd Zeeshan, Dipankar Bhanja, Sujit Nath, 2017. Analytical study on the thermal performance of a partially wet constructal T-shaped fin, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020039 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990192
  7. Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2017. Linear stability analysis of planar liquid sheet with unequal gas velocities confined between two solid walls, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020113 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990266 (Citation: 1)
  8. Tuhin Deshamukhya, Dipankar Bhanja, Sujit Nath, Ambarish Maji, Gautam Choubey, 2017. Analytical study of temperature distribution in a rectangular porous fin considering both insulated and convective tip, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020031 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990184 (Citation: 2)
  9. Somnath Pal, Sujit Nath, Dipankar Bhanja, 2016. Modelling of phase change material used as a latent heat thermal reservoir, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  10. Ratnadeep Nath, Dipankar Bhanja, Sujit Nath, 2016. Analytical study of thermal behaviour of a rectangular porous fin with temperature dependent heat generation, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  11. Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2016. Nonlinear analysis of breakup of a thin planar liquid sheet subjected to unequal gas velocities, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  12. Aabir Das, Sujit Nath, Dipankar Bhanja, 2016. Numerical modeling of fin-and-tube heat exchanger with vortex generators, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  13. P. Saini, D. Bhanja, S. Nath, A. Biswas, 2015. Energy and Exergy Analysis of a Flat Plate Collector Solar Water Heater, ISESCO JOURNAL of Science and Technology vol. 11 (20), pp. 2-8. Abhijeet Borthakur, Dipankar Bhanja, Sujit Nath, 2016. Numerical modeling of phase change material to enhance heat transfer using extended surfaces, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  14. P. Saini, A. Biswas, D. Bhanja, 2015. Performance evaluation and simulation of solar panel, wind mill, fuel cell hybrid system for small scale energy harvesting, Journal of Clean Energy Technologies Vol. 3, No. 6, pp 417-421. DOI: 10.7763/JOCET.2015.V3.234, (Citation: 6).
  15. S. Chakravarthy, D. Bhanja, P. K. Mandal, 2014. Heat transfer analysis in porous fin of different profiles using Variational iteration method, International conference on Industrial Engineering Science & Applications-2014 (IESA-14), 2nd -4th April, NIT Durgapur, ISBN: 978-93-80813-27-1, pp. 46-51.
  16. A. Chandel, D. Bhanja, 2014. Thermal analysis of porous fin with internal heat generation, International conference on Industrial Engineering Science & Applications-2014 (IESA-14), 2nd -4th April, NIT Durgapur, ISBN: 978-93-80813-27-1, pp. 26-31.
  17. D. Bhanja, B. Kundu, P. K. Mandal, 2013. An analytical prediction in thermal analysis of porous pin fin with variable thermal conductivity, Proceedings of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013.
  18. D. Bhanja, B. Kundu, P. K. Mandal, 2013. Thermal analysis of porous pin fin used for electronic cooling, Journal of Procedia Engineering, Elsevier, (Scopus) Vol. 64, pp. 956-965. doi: 10.1016/j.proeng.2013.09.172. (Citation: 27)
  19. D. Bhanja, B. Kundu, 2010. Heat transfer and fin performance comparison between constructal T-shaped porous and solid fin, International Conference on Modeling, Optimization and Computing (ICMOC 2010), 29-31 October, 2010, http://proceedings.aip.org. pp. 122-128, SCOPUS (Citation: 2)

  1. Paul, R., Gouda, K., and Bhowmik, S., 2019, Effect of different operating parameters on tribological behaviour of bio-composite materials: A review, 12th International Conference on Sustainable Energy & Environmental Protection (SEEP 2019), (18th – 21st November 2019, University of Sharjah, UAE), pp: 124 – 131, ISBN: 978-9948-36-626-3
  2. Gouda, K., Bhowmik, S., and Das, B., 2019, Tailoring the thermomechanical behavior of pristine epoxy with incorporation of ultra-sonicated bamboo and graphite filler, 12th International Conference on Sustainable Energy & Environmental Protection (SEEP 2019), (18th – 21st November 2019, University of Sharjah, UAE), pp: 229 – 334, ISBN-978-9947-36-625-6
  3. Zindani, D., Maity, S.R., and Bhowmik, S., 2019, Fuzzy-EDAS (Evaluation Based on Distance from Average Solution) for Material Selection Problems, 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019), (March 8 - 9, 2019, Indian Institute of Technology Guwahati) Published in Springer Book Advances in Computational Methods in Manufacturing, Lecture Notes on Multidisciplinary Industrial Engineering, Chapter 63, PP - 755 - 771, DOI: https://doi.org/10.1007/978-981-32-90
  4. Bhowmik, C., Baruah, A., Bhowmik, S., and Ray, A., Green energy sources selection for sustainable energy planning using multi-criteria decision-making approach, International Conference on Mechanical, Materials and Renewable Energy, 8–10 December 2017, Sikkim, India Published in IOP Conf. Series: Materials Science and Engineering 377 (2018) 012029 DOI:10.1088/1757-899X/377/1/012029
  5. Kumar, R., Kumar, G., and Bhowmik, S., 2018, Synthesis and Responsive Study of Tensile and Flexural Properties of Bamboo Filler Based Functionally Graded Composite, International Conference on Recent Innovations and Developments in Mechanical Engineering (ICRIDME 2018), (08-10 November 2018, Department Mechanical Engineering, NIT Meghalaya), Published in Springer Book, Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering, PP – 373 – 384, DOI: https://doi.org/10.1007/97
  6. Kakoti, N., Sethi, R., Agarwal, S., Zindani, D., and Bhowmik, S., Study of tensile behaviour of bamboo epoxy composites using finite element method, 1st International Conference on Mechanical Engineering (INCOM18), (January 4 – 6, 2018, Jadavpur University Kolkata India) Paper No. – 092, Page 43 – 46.
  7. Bhowmik, C., Bhowmik, S., and Ray, A., Selection of green energy sources: an entropy-topsis Approach, 1st International Conference on Mechanical Engineering (INCOM18), (January 4 – 6, 2018, Jadavpur University Kolkata India) Paper No. INCOM18-177, Page 658 – 661.
  8. Bhosale, S.B., Bhowmik, S., and Ray, A., Multi criteria decision making for selection of material composition for powder metallurgy process, 7th International Conference on Materials Processing and Characterization (ICMPC 2017), (17th – 19th March 2017, GRIET, Hyderabad, Telangana in collaboration with MANIT, Bhopal, M.P.), Published in Materials Today: Proceedings, 5(2), 2018, 4615–4620. DOI:https://doi.org/10.1016/j.matpr.2017.12.032
  9. Bhowmik, C., Gangwar, S., Bhowmik, S., and Ray, A., Selection of Energy-Efficient Material: An Entropy–TOPSIS Approach, International Conference on Soft Computing: Theories and Applications (SoCTA 2016), (December 28-30, 2016, Amity University Rajasthan, Jaipur, India), Published in Book Soft Computing: Theories and Applications Proceedings of SoCTA 2016, Volume 2, PP: 31-39, Print ISBN978-981-10-5698-7, Online ISBN978-981-10-5699-4, DOI: https://doi.org/10.1007/978-981-10-5699-4.
  10. Malakar, C. and Bhowmik, S., Assessment of Optimal Drilling Parameter for Bamboo Filler Reinforced Epoxy Composite, 10TH INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND ENVIRONMENTAL PROTECTION (June 27TH – 30TH, 2017, Bled, Slovenia), Mechanical Engineering, 101 - 111, DOI:https://doi.org/10.18690/978-961-286-057-8.10, ISBN 978-961-286-057-8, http://press.um.si
  11. Kumar, R., Kumar, K., and Bhowmik, S. Analysis of Mechanical Properties of Wood Dust Reinforced Epoxy Composite Using Response Surface Methodology, 6TH INTERNATIONAL CONFERENCE ON MECHANICAL, INDUSTRIAL, AND MANUFACTURING TECHNOLOGIES (Mar 6, 2015 - Mar 7, 2015, Melaka, Malaysia). Published in Advanced Materials Research, Vol. 1119, pp. 258-262, DOI: 10.4028/www.scientific.net/AMR.1119.258.
  12. Chanda, B., Kumar, R., Kumar, K. and Bhowmik, S., Optimisation of Mechanical Properties of Wood Dust-reinforced Epoxy Composite Using Grey Relational Analysis, 4th International Conference on Soft Computing for Problem Solving Advances in Intelligent Systems and Computing, (27 – 29th December 2014, NIT Silchar), Published in Proceedings 336, 2, 13-24, 2015, DOI: 10.1007/978-81-322-2220-0_2.
  13. Kumar, R., Kumar, K., and Bhowmik, S., Optimization of Mechanical properties of epoxy based wood dust reinforced green composite using Taguchi method, INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (27th-29th, March 2014, NIT Surathkal), Published in Procedia Materials Science, 5, 688 – 696, DOI: 10.1016/j.mspro.2014.07.316.
  14. Kumar, R., Kumar, K., Sahoo, P. and Bhowmik, S., Study of Mechanical Properties of Wood Dust Reinforced Epoxy Composite, 3RD INTERNATIONAL CONFERENCE ON MATERIALS PROCESSING AND CHARACTERISATION (March 8th-9th, 2014, GRIET Hyderabad). Published in Procedia Materials Science, 6, 551 – 556, DOI: 10.1016/j.mspro.2014.07.070.
  15. Bhowmik, S., Sahoo, P., Acharyya S.K. and Dhar, S. Fracture Behaviour of 20MnMoNi55 Steel in DBT Region under Corrosive Environment, INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (Jul 18, 2013 - Jul 20, 2013, IIITDM Kancheepuram, Chennai, India). Published in Procedia Engineering, 64, 795-804, Scopus, DOI: 10.1016/j.proeng.2013.09.155
  16. Bhowmik, S., Bhattacharyya, K., Sahoo, P., Acharyya, S.K., Chattopadhyay, J. and Dhar, S., 2013, Evaluation of master curve and T0 of 20MnMoNi55 steel from CT and TPB specimens and a comparative study, SMiRT - 22, Division II.
  17. Bhowmik, S., Chatterjee, A., Acharyya, S.K, Sahoo, P., Dhar, S., and Chattopadhyay, J., Application of master curve methodology in the ductile to brittle transition region for the material 20MnMoNi55 steel, 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21) (November 6-11, 2011, New Delhi, India International Association for Structural Mechanics in Reactor Technology); Div-II: Paper ID# 238.
  18. Bhowmik, S., Sahoo, P., Acharyya, S.K., Dhar, S. and Chattopadhyay, J., 2011, Direct measurement of JIC from the load versus load-line displacement data for 20MnMoNi55 steel, ICME 11-AM-008, Dhaka.


  1. Sandip Saha, Pankaj Biswas, Sujit Nath, 2021. A review on spectral element solver Nek5000, AIP Conference Proceedings 2336, 030001 (2021); https://doi.org/10.1063/5.0045709
  2. Saha S., Biswas P., Nath S., 2020. Numerical Modeling of Bifurcation and Leakage of Blood Flow in Mitral Valve to Predict Heart Malfunctioning. In: Dawn S., Balas V., Esposito A., Gope S. (eds) Intelligent Techniques and Applications in Science and Technology. ICIMSAT 2019. Learning and Analytics in Intelligent Systems, vol 12. Springer, Cham. https://doi.org/10.1007/978-3-030-42363-6_80
  3. Saha, S., Biswas, P., Nath, S., 2020. Bifurcation phenomena for incompressible laminar flow in expansion channel to study Coanda effect, Journal of Interdisciplinary Mathematics, Taylor and Francis (Scopus); Vol. 23 (2), pp. 493–502; DOI : 10.1080/09720502.2020.1731962 ; ISSN: 0972-0502.
  4. Md. Zeeshan, V. Kumar, S. Nath, D. Bhanja, 2019. A Numerical Investigation on the Performance of Finned Tube Heat Exchangers Having Alternate Arrangements of Flat and Circular Tubes, International Conference on Applied Physics, Power and Material Science, Journal of Physics: Conf. Series 1172 (2019) 012057 , IOP Publishing, doi:10.1088/1742-6596/1172/1/012057
  5. Kashmiri Deka, Dipankar Bhanja, Sujit Nath, 2018. Fundamental solution of steady and transient bio heat transfer equations especially for skin burn and hyperthermia treatments, Heat Transfer - Asian Research, Wiley, pp. 1-18, DOI:10.1002/htj.21388 ESCI, ISSN: 1523-1496.
  6. Mohd Zeeshan, Sujit Nath, Dipankar Bhanja, 2018. A CFD Analysis to Compare the Performances of Fin and Tube Heat Exchangers having Different Augmentation Techniques, International Journal of Applied Engineering Research, vol. 13 (6), pp. 327-333, ISSN 0973-4562.
  7. Mohd Zeeshan, Saheera Azmi Hazarika, Sujit Nath, Dipankar Bhanja, 2017. Numerical investigation on the performance of fin and tube heat exchangers using rectangular vortex generators, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020011 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990164, (Citation: 5)
  8. Saheera Azmi Hazarika, Mohd Zeeshan, Dipankar Bhanja, Sujit Nath, 2017. Analytical study on the thermal performance of a partially wet constructal T-shaped fin, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020039 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990192
  9. Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2017. Linear stability analysis of planar liquid sheet with unequal gas velocities confined between two solid walls, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020113 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990266 (Citation: 1)
  10. Tuhin Deshamukhya, Dipankar Bhanja, Sujit Nath, Ambarish Maji, Gautam Choubey, 2017. Analytical study of temperature distribution in a rectangular porous fin considering both insulated and convective tip, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020031 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990184 (Citation: 2)
  11. Somnath Pal, Sujit Nath, Dipankar Bhanja, 2016. Modelling of phase change material used as a latent heat thermal reservoir, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  12. Ratnadeep Nath, Dipankar Bhanja, Sujit Nath, 2016. Analytical study of thermal behaviour of a rectangular porous fin with temperature dependent heat generation, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  13. Prabhakar Jha, N. V. Deshpande, Sujit Nath, 2016. CFD simulation of Indian Freight train aerodynamics, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  14. Sharanga Bora, Sujit Nath, 2016. Numerical analysis of Coanda ejector for heat sink applications, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  15. Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2016. Nonlinear analysis of breakup of a thin planar liquid sheet subjected to unequal gas velocities, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  16. Aabir Das, Sujit Nath, Dipankar Bhanja, 2016. Numerical modeling of fin-and-tube heat exchanger with vortex generators, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  17. Abhijeet Borthakur, Dipankar Bhanja, Sujit Nath, 2016. Numerical modeling of phase change material to enhance heat transfer using extended surfaces, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
  18. P. Saini, D. Bhanja, S. Nath, A. Biswas, 2015. Energy and Exergy Analysis of a Flat Plate Collector Solar Water Heater, ISESCO JOURNAL of Science and Technology vol. 11 (20), pp. 2-8.
  19. S. Nath, A. Mukhopadhyay, A. Datta, S. Sen, 2012. Analysis of disintegration of planar liquid sheet sandwiched between gas streams with unequal velocities and resulting spray formation, ICLASS 2012, 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, September 2-6, 2012.
  20. S. Nath, A. Mukhopadhyay, S. Sen, A. Datta 2009. Instability Analysis of a Plane Liquid Sheet Sandwiched Between Two Gas Streams of Nonzero Unequal Velocities, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, https://doi.org/10.2514/6.2009-5157

  1. V S S Venkatesh, Ashish B. Deoghare, “Fabrication and Mechanical Behaviour of Al-Kaoline Metal Matrix Composite fabricated through powder metallurgy technique, Materials Today: Proceedings”, S2214-7853(20)37581-7
  2. Sumit kumar* Ashish B. Deoghare , "Modelling of Human Abdominal Artery for Blood flow Analysis " Materials Today: Proceedings 5 (2018) 12877–12885
  3. Sumit Das Lalaa *, Ajay Biswasb , John Debbarmab , A.B. Deogharea, "Study of hardness of the weld bead formed by partial hybrid welding by metal inert gas welding and submerged arc welding at three different heat inputs ", Materials Today: Proceedings 5 (2018) 13650–13657
  4. S D Lala*1 , A B Deoghare1 and S Chatterjee2, "Mechanical and Morphological characterization of Walnut Shell reinforced epoxy composite ", IOP Conf. Series: Materials Science and Engineering 377 (2018) 012011 doi:10.1088/1757-899X/377/1/012011
  5. Emon Baruaa *, Saurav Dasb , Ashish B. Deogharec, "Development of computational Tibia model to investigate stress shielding effect at healing stages", Materials Today: Proceedings 5 (2018) 13267–13275
  6. Emon Barua, Ashish B. Deoghare, Payel Deb, Sumit Das Lala, "Naturally derived biomaterials for development of composite bone scaffold: A review" IOP Conf. Series: Materials Science and Engineering 377 (2018) 012013 doi:10.1088/1757-899X/377/1/012013
  7. P Deb, A B Deoghare and E Barua, "Poly ethylene glycol/fish scale-derived hydroxyapatite composite porous scaffold for bone tissue engineering" IOP Conf. Series: Materials Science and Engineering 377 (2018) 012009 doi:10.1088/1757-899X/377/1/012009
  8. Payel Deb *, Ashish B. Deoghare , Animesh Borah, Emon Barua, Sumit Das Lala, "Scaffold Development Using Biomaterials: A Review" Materials Today: Proceedings 5 (2018) 12909–12919
  9. Ghanshyam Boob, Ashish deoghare, Pramod Walke, “To investigate the effect of turning process parameters on fatigue performance of machined steel EN-8”, International Conference on Advances in Mechanical Engineering (ICAME-16), 3-4 June 2016, GHRCE Nagpur.
  10. Ghanshyam Boob, Ashish deoghare, Pramod Walke, "Fatigue life prediction model for steel EN-31 considering effect of turning process parameters", INCOM18: Proceedings of the 1st International Conference on Mechanical Engineering, Jadavpur University Kolkata India January 4-6, 2018. Paper no- INCOM18.
  11. Smriti Jaiswal, Ashish B.Deoghare, K.M.Pandey, “Mass concentration analysis of aerosol through human airways”, Proceedings of the 2nd International Conference on Inventive Systems and Control (ISISC 20180), ISBN: 978-1-5386-0807-4.
  12. Radhe Tado, Ashish B.Deoghare, K.M.Pandey, “Computational Study of Blood Flow Analysis for Coronary Artery Disease”, World Academy of Science, Engineering and Technology, International Journal of Biomedical and Biological Engineering, vol:12, No:2, 2018.
  13. Shende Suraj Balu, A.B.Deoghare, K.M.Pandey, “Design and Modeling of Human Middle Ear for Harmonic Response Analysis”, World Academy of Science, Engineering and Technology, International Journal of Biomedical and Biological Engineering, vol:12, No:2, 2018.
  14. S.B.Kharat, A.B.Deoghare, K.M.Pandey, “ Airflow and Particle Transport Through Human Airways: A Systematic Review”, IOP Conf. Series: Materials Science and Engineering 225(2017)012132. Doi:10.1088/1757-899X/225/1/012132.
  15. N. G. Thangan, A. B Deoghare, P. M. Padole “Assessment of fluid flow hydrodynamics for cylindrical and conical fluidized bed reactor” ICMET 2014: International Conference on Materials Engineering and Technology, Sep 26-27, 2014 in London, UK.
  16. Yognandini Ramteke and Ashish Deoghare “Development of Strength Testing Machine for Artificial Ligaments” iNaCoMM-2013, December 18-20, 2013 at IIT Roorkee, pp 885-889.
  17. Ghanshyam Boob and Ashish Deoghare “Estimation of strain controlled fatigue properties of steels using tensile test data.” iNaCoMM-2013, December 18-20, 2013 at IIT Roorkee, pp 156-162.
  18. Ashish Deoghare, and Pramod Padole, “Development of computational Three Dimensional solid model from CT Scanned.” 4th International Conference on Computer Modeling and Simulation (ICCMS 2012), February 17-18, 2012, Hong Kong 2012, vol.4. pp. 189-192, ISSN 2010-460X.

  1. S. Kushari, A. Chakraborty, T. Mukhopadhyay, S. R. Maity, S. Dey, PNN based stochastic failure analysis of laminated composite plates, National Conference on Multidisciplinary Design, Analysis and Optimization (NCMDAO 2020) at Vikram Sarabhai Space Centre (VSSC), Indian Space Research Organization (ISRO), Thiruvananthapuram held on Oct 21-25, 2020.
  2. B. Roy, S. Dey, Certainty of uncertainty in design of full cylindrical journal bearing, National Conference on Multidisciplinary Design, Analysis and Optimization (NCMDAO 2020) at Vikram Sarabhai Space Centre (VSSC), Indian Space Research Organization (ISRO), Thiruvananthapuram held on Oct 21-25, 2020.
  3. K. K. Gupta, L. Roy, S. Dey, Machine learning based molecular simulations of monolayered graphene, First Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) during Sept 4-6, 2020 at Indian Institute of Technology Kharagpur, India.
  4. Vaishali, S. Dey, Effect of thickness on probabilistic free vibration of hybrid FG-sandwich cylindrical shells, First Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) during Sept 4-6, 2020 at Indian Institute of Technology Kharagpur, India.
  5. Himanshu Prasad Ratauri, Subrata Kushari, S. Dey, Radial Basis function based first-ply failure analysis of composite spherical shells, International Conference on Recent Developments in Mechanical Engineering (ICRAME 2020) during 07-09 February 2020, NIT Silchar, India.
  6. Vaishali, S. Dey, Effect of temperature on random natural frequency of functionally graded spherical shells – A PCE Approach, International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020 during 07-09 February 2020, NIT Silchar, India.
  7. Vaishali and S. Dey, Radial basis function based probabilistic dynamic stability of doubly curved shells, The 64th Congress of Indian Society of Theroretical and Applied Mechanics (ISTAM-2019) - An International Meet held on Dec 9-12, 2019 at Indian Institute of Technology Bhubaneswar, India
  8. S. Kushari, A. Chakraborty, T. Mukhopadhyay, S.R. Maity, S. Dey, ANN based random first-ply failure analyses of laminated composite plates, 7th International Congress on Computational Mechanics and Simulation. (ICCMS 2019) held on Dec 11-13, 2019 at Indian Institute of Technology Mandi, India.
  9. Vaishali and S. Dey, Machine learning based thermal uncertainty on stochastic natural frequency of functionally graded cylindrical shells, 7th International Congress on Computational Mechanics and Simulation. (ICCMS 2019) held on Dec 11-13, 2019 at Indian Institute of Technology Mandi, India.
  10. B. Roy, S. Dey, Steady state behaviour of hydrodynamic journal bearings including random surface roughness, The 1st International Conference on Mechanical Power Transmission (ICMPT 2019) held on July 11-13, 2019 at Indian Institute of Technology Madras, India.
  11. K.K. Gupta, A. Roy, S. Dey, Comparative study of various defects in monolayer graphene using molecular dynamics simulation, Proceeding of International Conference on Applied Mechanical Engineering Research (IC-AMER 2019) held on May 2-5, 2019 at National Institute of Technology Warangal, India.
  12. R. P. Saw, S. Dey, S. Dutta, Optimizing microhardness of electroless Ni-P coated copper substrate using PSO, Proceeding of International Conference on Applied Mechanical Engineering Research (IC-AMER 2019) held on May 2=5, 2019 at National Institute of Technology Warangal, India.
  13. K. K. Gupta, S. Dey, Effect of temperature on the fracture strength of perfect and defective monolayered graphene, 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019), held on March 8-9, 2019 at Indian Institute of Technology Guwahati, India
  14. T. Loha, S. Dey, Stochastic longitudinal vibration of single walled carbon nanorods- A non local elasticity approach, 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019), held on March 8-9, 2019 at Indian Institute of Technology Guwahati, India.
  15. T. Loha, Vaishali, S. Dey, Stochastic nonlocal fundamental frequencies of single walled carbon nanorod - An artificial neural network approach, International Conference on Recent Advances in Composite Materials (ICRACM 2019) scheduled on February 25-28, 2019 at IIT- BHU, India.
  16. S. Saha, S. R. Maity, S. Dey, Artificial neural network based uncertain material removal rate by turning, International Conference on Reliability Safety and Hazard (ICRESH 2019) held on January 11-13, 2019 at Indian Institute of Technology Madras, India.
  17. R. R. Kumar, K. M. Pandey, S. Dey, Stochastic free vibration analysis of sandwich plates: A Radial basis function approach, International Conference on Reliability Safety and Hazard (ICRESH 2019) held on January 11-13, 2019 at Indian Institute of Technology Madras, India.
  18. R. R. Kumar, K. M. Pandey, S. Dey, Radial basis function based probabilistic buckling behaviour of sandwich plates, International Conference on Computational Mathematics in Nanoelectronics and Astrophysics (CMNA 2018) held on Nov 1-3, 2018 at Indian Institute of Technology Indore, India.
  19. P. K. Karsh, S. Dey, Stochastic natural frequencies of functionally graded plates based on power law index, International Conference on Computational Mathematics in Nanoelectronics and Astrophysics, held on Nov 1-3, 2018 at Indian Institute of Technology Indore.
  20. P.K. Karsh, T. Mukhopadhyay, S. Dey, A stochastic investigation of effect of temperature on natural frequencies of functionally graded plates, International conference on Trends and Recent Advances in Civil Engg. on August 23-24, 2018 at Amity University Noida
  21. R. Basak, R. Choudhury, S. Dey, Fuzzy based uncertain low velocity impact analysis of laminated composite plates, International Conference on Composite Materials and Structures (ICCMS 2017) on Dec 27-29, 2017 at Indian Institute of Technology Hyderabad, India
  22. P. K. Karsh, S. Dey, Stochastic frequency response function analysis of functionally graded plates, 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2017) on Dec 28-30, 2017 at Indian Institute of Technology Kharagpur, India.
  23. S. Das, B. Roy, S. Dey, Effect of eccentricity on stochastic dynamic characteristics of hydrodynamic journal bearing, 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2017) on Dec 28-30, 2017 at Indian Institute of Technology Kharagpur, India
  24. Ravi Ranjan Kumar, Vaishali, K.M. Pandey, S. Dey, Effect of skewness on stochastic natural frequency of sandwich plates, 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2017) on Dec 28-30, 2017 at Indian Institute of Technology Kharagpur, India.
  25. P. K. Karsh, T. Mukhopadhyay, S. Dey, Stochastic investigation of natural frequency for functionally graded plate, 3rd International Conference on Mechanical and Aeronautical Engineering (ICMAE 2017) on Dec 13-16, 2017 at Dubai, UAE
  26. P. K. Karsh, A. Kumar, T. Mukhopadhyay, S. Dey, Stochastic natural frequency analysis of functionally graded plate – An artificial neutral network approach, 13th International Conference on Vibration Problems (ICOVP 2017) scheduled on Nov 29 to Dec 2, 2017 at Indian Institute of Technology Guwahati, India
  27. Kumar Maharshi, L. Roy, T. Mukhopadhyay, S. Dey, Stochastic dynamic behaviour of polymer hydrodynamic journal bearing, 6th International Conference on Functional Electroceramic and Polymers (ICEP 2017) held on Feb 20-22, 2017 at Indian Institute of Technology Kharagpur, India
  28. H. Singh, B. C. Hazarika, S. Dey, Low velocity impact responses of functionally graded plates, 11th International Symposium on plasticity and impact mechanics (IMPLAST 2016), held on Dec 11-14, 2016 at Indian Institute of Technology Delhi, India.
  29. S. Dey, T. Mukhopadhyay, S. Adhikari, A meta-law for functionally graded materials based on low velocity impact parameters, 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV 2016) held on November 5–7, 2016 at Indian Institute of Technology Kharagpur, India
  30. B. C. Hazarika, H. Singh, S. Dey, Free vibration of functionally graded plates – A comparative study, 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV 2016) held on November 5–7, 2016 at Indian Institute of Technology Kharagpur, India
  31. S. Dey, T. Mukhopadhyay, S. Chakraborty, R. Chowdhury, S. Adhikari, A. Karmakar, A. Spickenheuer, Stochastic natural frequency of composite plates using Kriging model, 6th International Congress on Computational Mechanics and Simulation (ICCMS 2016), held on June 27 to July 1, 2016 at Indian Institute of Technology Bombay, India.
  32. S. Dey, T. Mukhopadhyay, A. Spickenheuer, U. Gohs, S. Adhikari, Artificial neural network based stochastic natural frequency analysis of composite plates, 12th International Conference on Vibration Problems (ICOVP 2015) on Dec 14-17, 2015 at Indian Institute of Technology Guwahati, India.
  33. S. Dey, T. Mukhopadhyay, H.H. Khodaparast, S. Adhikari, Uncertainty quantification of dynamic characteristics of composites – A fuzzy approach, 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015) held on May 25-27, 2015 at Crete Island, Greece.
  34. S. Dey, T. Mukhopadhyay, H.H. Khodaparast, S. Adhikari, Reliability based optimization of composite spherical shells, 23rd UK Conference of the Association for Computational Mechanics in Engineering (ACME 2015) held on April 8-10, 2015 at Swansea University, Swansea, United Kingdom.
  35. S. Dey, T. Mukhopadhyay, S. Adhikari, Free vibration analysis of angle-ply composite plates with uncertain properties, 56th AIAA/ASME/ASCE/AHS/ASC structures, Structural Dynamics, and Materials Conference, held on January 5-9, 2015, at Florida, USA.
  36. S. Dey, S. Adhikari, A. Karmakar, Free vibration of composite plates – A Monte Carlo approach, International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2014) held on December 29-31, 2014 at Indian Institute of Technology Kharagpur, India.
  37. S. Dey, T. Mukhopadhyay, S. Adhikari, Transient response of delaminated torsion stiff composite conical shell panel subjected to low velocity oblique impact, The Twelfth International Conference on Computational Structures Technology (CST 2014) held on September 2-5, 2014 at Naples, Italy.
  38. S. Dey, M. Roy, S. Das, A. Karmakar, Effect of twist and striker velocity on transient response of torsion stiff composite conical shells under delamination, 10th International Conference on Mechanical Engineering (ICME 2014) held on June 20-21, 2014 at BUET, Dhaka, Bangladesh.
  39. S. Dey, A. Karmakar, S. Adhikari, Effect of rotation on free vibration analyses of functionally graded conical shells - A finite element approach, 1st International Conference on Mechanics of Composites (MECHCOMP 2014) scheduled on June 8-12, 2014 at Stony Brook University, Long Island, NY State, USA.
  40. S. Dey, A. Karmakar, Effect of multiple delamination on composite turbine blade subjected to low velocity impact, 1st International & 16th National Conference on Machines and Mechanisms (iNaCoMM 2013) held on December 18-20, 2013 at Indian Institute of Technology Roorkee, India.
  41. S. Dey, A. Das, A. Karmakar, Effect of contact stiffness and twist on low velocity impact oblique impact response of composite turbomachinery blades, International Conference on Smart Technologies for Mechanical Engineering (STME-2013) on Oct 25-26, 2013 at Delhi Technological University (DTU), New Delhi, India.
  42. S. Dey, A. Karmakar, Low velocity impact response of cross-ply composite conical shells under delamination, Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012) held on December 5-8, 2012 at Indian Institute of Technology Delhi, India.
  43. S. Dey, M. Roy, A. Karmakar, Finite element transient dynamic analysis of delaminated composite conical shells subject to low velocity impact, ASME 2012 Gas Turbine India Conference held on December 1, 2012 at Mumbai, India.
  44. S. Dey, A. Saha, A. Karmakar, Free vibration analysis of bending stiff composite conical shells with delamination – A finite element approach, 9th International Conference of Mechanical Engineering (ICME 2011), held on December 18-20, 2011 at Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh.
  45. S. Dey, A. Karmakar, Natural frequencies of delaminated quasi-isotropic composite conical shells, International Conference on Advances in Materials and Materials Processing (ICAMMP 2011), held on Dec 9-11, 2011 at Indian Institute of Technology Kharagpur, India.
  46. S. Dey, A. Karmakar, Free vibration of delaminated torsion stiff composite conical shells, International Conference on Advances in Materials and Manufacturing Technology (AMMT 2011), held on July 20, 2011 at Chitkara Institute of Engg. & Technology, Chandigarh, India.
  47. S. Dey, A. Karmakar, Effect of multiple delamination on free vibration of cross-ply composite conical shells, 5th International Conference on Advances in Mechanical Engineering (ICAME 2011), held on June 6-8, 2011 at Sardar Vallabhbhai National Institute of Technology Surat, Gujarat, India.
  48. S. Dey, A. Karmakar, Comparative study of single and double delamination of composite shells, International Conference on Advances in Engineering and Technology (ICAET 2011), held on May 27-28, 2011 at E.G.S. Pillay Engineering College, Nagapattinum, Tamilnadu, India.
  49. S. Dey, A. Karmakar, Effect of location of delamination on free vibration of pretwisted graphite-epoxy cross-ply composite conical shells, Proceeding of International Conference on Advances in Polymer Science and Rubber Technology (APSRT) – Challenges towards 2020 and Beyond, held on March 3-5, 2011 at Indian Institute of Technology Kharagpur, India.
  50. S. Dey, T. Bandopadhyay and A. Karmakar, Vibration characteristics of delaminated composite conical shells, Proceeding of 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM) held on December 27-29, 2010 at Indian Institute of Technology Kharagpur, India.
  51. S. Dey, A. Karmakar, Vibration characteristics of delaminated pretwisted crossply composite conical shells, Proceeding of International Conference on Carbon Nanotechnology : Potential and Challenges (CARBON 10) held on December 15 -17, 2010 at Indian Institute of Technology Kanpur, India.

  1. S. Debnath, B. Das, P. Randive, “Experimental energy and exergy analysis of flat plate solar air collector having different spacing and tilt angle”, Renewable Energy Technologies: Issues and Perspectives (RETIP 2017) AIP Conf. Proc. 1998, 020014-1–020014-9; https://doi.org/10.1063/1.5049110.
  2. Saurabh Tripathi, Krishna Murari Pandey and Pitambar Randive, Computational Study on Effect of Obstacles in Pulse Detonation Engine, international Conference on Recent Trends in Engineering & Sciences Vishakhapattanam India
  3. Lakka Suneetha, P. Randive, K. M. Pandey, Numerical investigation on the effect of turbulence models on prediction of combustion characteristics of scramjet combustor, ICRIDME-2018, Nov-8-10, NIT Meghalaya, Shilong.
  4. Lakka Suneetha, P. Randive, K. M. Pandey, A comparative evaluation of combustion characteristics of struts and wall injection technique in a cavity based scramjet combustor, ICRIDME-2018, Nov-8-10, NIT Meghalaya, Shilong.
  5. Lakka suneetha, P.Randive, K.M.Pandey, Advances in flame stabilization process on a dual mode scramjet-A Review (ICAMME-2018; 24,25 JANUARY-2018), ANU, Guntur
  6. Debayan Bhowmick, Pitambar Randive, Sukumar Pati; "Numerical Investigation on Influence of Porous Layer on Fluid Flow and Heat Transfer Characteristics in a Partially Porous Wavy Channel"; 7th International & 45th National Fluid Mechanics and Fluid Power Conference (FMFP) 2018, IIT Bombay, Mumbai.
  7. Debayan Bhowmick, Pitambar Randive, Sukumar Pati; "EFFECT OF THICKNESS OF POROUS LAYER ON THERMO-HYDRAULIC CHARACTERISTICS AND ENTROPY GENERATION IN A PARTIALLY POROUS WAVY CHANNEL"; International Conference on Recent Innovations and Developments in Mechanical Engineering (ICRIDME 2018) NIT Meghalaya, Shillong, Meghalaya.
  8. Vijay Singh, Debayan Bhowmick, Pitambar Randive, Sukumar Pati; "Numerical Investigation of Turbulent Offset Jet on The Different Surface Undulation"; International Conference cum Exhibition on Thermal Analysis and Energy Systems. (ICTAES-2018). Hindustan College of Engineering and Technology, Coimbatore.
  9. A Sarker, MP Boruah, P Randive, S Pati, Effect of Capillarity-Viscosity Interaction on Coalescence of Droplets in a Confined Channel, Fluid mechanics and fluid power conference, IIT bombay, 2018
  10. Suman Debnath, Abhilekh Sonowal, Biplab Das, Pitambar Randive and K.M. Pandey, Performance analysisof solar air collector in north eastregion of Iindia Proceedings of SEEP2017, 27-30 june 2017, bled, slovenia
  11. Lakka suneetha, P.Randive, K.M.Pandey, Advancess in flame stabilization process on a dual mode scramjet-A Review, 2018,International Conference on Advances in Materials and Manufacturing Engineering
  12. Randive, P., Bhardwaj, S., and Dalal, A., 2014, “Lattice Boltzmann Modelling of Capillarity-Induced Resonance of Blob Inside a Circular Tube”, Paper No: 526, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, IIT Kanpur, India.
  13. Randive, P., and Dalal, A., 2013, “Effect of Viscosity Ratio on Droplet Dynamics”, Paper No: HMTC1300574, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, IIT Kharagpur, India.
  14. Randive, P., and Dalal, A., Mukherjee, P. P., 2013, “Simulation of Blob Dynamics Inside a Channel Under Acoustic Excitation”, Paper No: HT2013-17372, ASME Summer Heat Transfer Conference, Minneapolis, MN, USA.
  15. Randive, P., Kulkarni, A. P., and Thombre, S. B., 2006, “Effect of Fin Array Parameters on Variation in Heat Transfer Coefficient for Natural Convections in Fins”, WSEAS Transaction, Volume 1, Pages.567­572.

  1. Pradip Deb Roy and Surendra Singh Yadav, (2019) "Investigation of Ocean Wave Characteristic in the Intermediate Depth of Water: A Numerical Simulation Approach" AIP Conference Proceedings 2091, 020017; https://doi.org/10.1063/1.5096508, pp 020017-1 - 10
  2. Pradip Deb Roy, (2018) "Interaction of linear waves with the vertical plate", Proc., 2nd International Conference on Advances in Dynamics, Vibration and Control, June 6 -8, 2018, pp. 503-510, NIT Durgapur, INDIA
  3. Pradip Deb Roy, M. Kumar, (2018) "Wave force on the submerged inclined thin plate in intermediate depth of water", 1st International conference on Mechanical materials and Renewable Energy, IOP Publishing, IOP Conf. Series: Materials Science and Engineering 377 (2018) 012159, SCOPUS, doi:10.1088/1757-899X/377/1/012159, pp. 2-8
  4. A. Biswas, A. Mohanty, R. K. Mitra, Pradip Deb Roy, (2017) "Ocean wave force and moment on submerged circular and rectangular thin plate in shallow water" Proc., International Conference – ARIMPIE-2017, 21-22 April, 2017, Dept. of Mechanical Engineering, I.T.S Engineering College, Greater Noida, UP, INDIA, ISSN: 978-93-85537-06-6, pp. 8-13, https://www.elkjournals.com/conferences/mechanical-production.../2017/april/
  5. A. Mohanty, R. K. Mitra, Pradip Deb Roy, (2017) "Design of compression helical spring under the action of ocean wave force through vertically submersed rectangular plate" Proc., International Conference – ARIMPIE-2017, 21-22 April, 2017, Dept. of Mechanical Engineering, I.T.S Engineering College, Greater Noida, UP, INDIA, ISSN: 978-93-85537-06-6, pp. 2-7, https://www.elkjournals.com/conferences/mechanical-production.../2017/april/
  6. Pradip Deb Roy, Y. Garud, (2016) "Variation of wave force on vertical thin plate: second-order stokes wave theory". Proc., International Conference on Advances in Dynamics, Vibration and Control, 25-27 February, 2016, pp. 243-247,NIT Durgapur, INDIA, www.nitdgp.ac.in/all_pdf15/ICADVC2016.pdf
  7. Pradip Deb Roy, S. Dutta, R. K. Mitra, (2014) "Variation of spring displacement under the action of ocean wave force on vertically submerged circular thin plate at shallow water". 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, FMFP14 G – 692, 12-14 Dec. 2014, IIT Kanpur, INDIA, https://www.springer.com/in/book/9788132227410
  8. Pradip Deb Roy, S. Ghosh, (2006) “Wave force on vertically submerged circular thin plate”. Proc., International conference in Marine Hydrodynamics, (MAHY-2006), 5-7 Jan. 2006 NSTL, Visakhapatnam, INDIA, pp. 139-149.

  1. Wear assessment of Cr2O3/TiAlN coated DAC-10 tool steel against steel and Al2O3 counterbodies, S. Kumar, S. R. Maity, L. Patnaik, International Journal of Applied Ceramic Technology, 2021.
  2. Particle swarm optimization based search for optimal machining parameters of A286 superalloy in WEDM operation, S. Saha, S. R. Maity, S. Dey, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2021.
  3. Investigation of temperature distribution in low power laser cladding of nickel through numerical analysis, D. Raj, S. R. Maity, Bipul Das, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2021.
  4. Dock detection for an underwater autonomous vehicle using deep learning in a simulated environment, S. Jena, S.R. Maity, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2021.
  5. Stochastic first-ply failure analysis of laminated composite plate- a moving least square approach, S. Kushari, S.R. Maity, A. Chakraborty, S. Dey, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2021.
  6. Effect of different surface modification on nanomechanical and wear properties of cold work tool steel: an experimental investigation, S. Kumar, S.R.Maity, L. Patnaik, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th -9th February, 2021.
  7. Parametric optimization of tribological process parameters and their comparative effect on wear responses of TiCrN coated cold work tool steel, S. Kumar, S. R. Maity, L. Patnaik. 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th -9th February, 2021.
  8. A comparative study on wear behaviors of hot work and cold work toolsteel with same hardness under dry sliding tribological test, S. Kumar, S. R. Maity, L. Patnaik. 10th International Conference on Materials Processing and Characterization (ICMPC-2020), IIT Indor, Madhya Pradesh, 15th -17th December, 2020.
  9. DLC/CrN or AlCrN/CrN composite films: The better candidate in terms ofanti-Wear performance and lesser ion release in hip implant, L. Patnaik, S. R. Maity, S. Kumar. 10th International Conference on Materials Processing and Characterization (ICMPC-2020), IIT Indor, Madhya Pradesh, 15th -17th December, 2020.
  10. Structural and Corrosion Study of a-C Film with Ti, Cr and Ni Interlayers, L. Patnaik, S. R. Maity, S. Kumar. National Conference on Physics and Chemistry of Materials (NCPCM-2020), IIT Indor, Madhya Pradesh, 15th -17th December, 2020.
  11. Relation Between Mechanical and Tribological Properties of Plasma Nitrided and TiCrN Coated YXR-7 Tool Steel, S. Kumar, S. R. Maity, L. Patnaik. National Conference on Physics and Chemistry of Materials (NCPCM-2020), IIT Indor, Madhya Pradesh, 15th -17th December, 2020.
  12. Effect of compaction pressure on mechanical properties of AA7075/B4C/graphite hybrid composite fabricated by powder metallurgy Techniques, G. Manohar, K. M. Pandey, S.R. Maity. International Conference & Exposition on Mechanical, Material and Manufacturing Technology (ICE3MT-2020), Hyderabad, Telangana , Oct. 9-10, 2020.
  13. Effect of china clay on mechanical properties of aa7075/b4c hybrid composite fabricated by powder metallurgy techniques. G. Manohar, K. M. Pandey, S.R. Maity, International Conference on Mechanical, Electronics and Computer Engineering (ICEMECE 2020), Kancheepuram, Tamilnadu, August, 2020.
  14. Characterization of boron carbide (b4c) particle reinforced aluminium metal matrix composites fabricated by powder metallurgy techniques – A review, International Conference on Mechanical, Electronics and Computer Engineering (ICEMECE 2020), Kancheepuram, Tamilnadu, August, 2020.
  15. Probing predictability of random first ply failure load of composite plates, S. Kushari, A. Chakraborty, S. R. Maity, S. Dey, Indian Society of Tology & Management (GITAM), Hyderabad, Telangana, Dec. 9-11, 2020.
  16. Effect of compaction pressure on mechanical properties of AA7075/B4C/graphite hybrid composite fabricated by powder metallurgy Techniques, G. Manohar, K. M. Pandey, S.R. Maity. International Conference & Exposition on Mechanical, Material and Manufacturing Technology (ICE3MT-2020), Hyderabad, Telangana , Oct. 9-10, 2020.
  17. Characterization of boron carbide (b4c) particle reinforced aluminium metal matrix composites fabricated by powder metallurgy techniques – A review, International Conference on Mechanical, Electronics and Computer Engineering (ICEMECE 2020), Kancheepuram, Tamilnadu, August, 2020.
  18. Effect of china clay on mechanical properties of aa7075/b4c hybrid composite fabricated by powder metallurgy techniques. G. Manohar, K. M. Pandey, S.R. Maity, International Conference on Mechanical, Electronics and Computer Engineering (ICEMECE 2020), Kancheepuram, Tamilnadu, August, 2020.
  19. Application of Box-Behnken Method for Multi-Response Optimization of Turning Parameters for DAC-10 Hot Work Tool Steel, S. Kumar, S. R. Maity, L. Patnaik , International Conference on Recent Developments in Mechanical Engineering (ICRAME 2020), Silchar, NIT Silchar, Assam, 07-09 February 2020.
  20. Identification of parameters for Ultrasonic Machining (USM) on drilling of graphene oxide/pineapple leaf filler reinforced epoxy hybrid composite using TODIM Method, A.Bania, S. R. Maity, International Conference on Recent Advancement of Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, India, 2020.
  21. Experimental investigation of dimensional deviation of square punches cut by wire EDM of A286 superalloy, S. Saha, S. R. Maity, S. Dey, International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, Feb-2020.
  22. Preheating path selection through numerical analysis of laser aided direct metal deposition, D. Raj, B. Das, S. R. Maity, International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, Feb-2020.
  23. Effect of sintering temperatures on mechanical properties of aa7075/b4c/graphite hybrid composite fabricated by powder metallurgy techniques. G. Manohar, K.M. Pandey, S.R. Maity. International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, Feb-2020.
  24. Effect of Pre Heat Treatment of Boron carbide Reinforcements on Mechanical Properties of AA7075/B4C Composite Fabricated by Powder Metallurgy Techniques. G. Manohar, K.M. Pandey, S.R. Maity. ICAMSME-2020, Nellore, Andhra Pradesh, Feb-2020.
  25. Aluminium (AA7075) Metal Matrix Composite Reinforced with B4C Nano Particles and Effect of Individual Alloying Elements in Al Fabricated by Powder Metallurgy Techniques. G. Manohar, K.M. Pandey, S.R. Maity ICAPPM-2020, Hyderabad, Telangana, January-2020.
  26. Parametric optimization of turning process parameters on surface roughness and tool wear rate of biomedical grade stainless steel 316LVM against AlCrN coated tool, L. Patnaik, E.Tripathi, S.R. Maity, S. Kumar, International Conference on Precision, Meso, Micro&Nano Engineering (COPEN 2019), Indor, IIT Indor, Madhya Pradesh,12-14 December 2019.
  27. Optimization of Ultrasonic Machining (USM) parameters on micro hole drilling of graphene oxide/pineapple leaf filler reinforced epoxy hybrid composite using Evaluation Based on Distance from Average Solution (EDAS) Method, A. Bania, D. Zindani, S. R. Maity, International Conference on Advanced Trends in Mechanical and Aerospace Engineering (ATMA-2019), Dayananda Sagar University, School of Engineering, Bengaluru, India, 2019.
  28. ANN-based random first-ply failure analyses of laminated composite plates, S. Kushari, A. Chakraborty, T. Mukhopadhyay, S.R. Maity, S. Dey, 7th International Congress on Computational Mechanics and Simulation (ICCMS-2019), IIT Mandi, India, 11-13 December 2019. Study the influence of thickness reduction and Pb content on the hardness of spray deposited Al-6Si alloy using linear regression analysis, 12th International Conference on Sustainable Energy & Environmental Protection University of Sharj
  29. Shape and Wear behavior of the spray deposited and warm rolled Al-Si-Pb alloys, B. V. R. Reddy, S. R. Maity, K. M. Pandey, 12th International Conference on Sustainable Energy & Environmental Protection University of Sharjah (SEEP-2019) , Dubai, UAE, Nov. 18-21, 2019.
  30. Effect of Processing Parameters on Mechanical Properties of Al7175/Boron Carbide (B4C) Composite Fabricated by Powder Metallurgy Techniques, G. Manohar, K.M Pandey, S.R. Maity, International Conference on Materials and Applied Science (ICME-2019), Warangal, Hotel Haritha Kakatiya, Telangana, 2019.
  31. Conceptualization and Development of Machining Fixture for Machining in Crankcase Cylinder, L. Patnaik, S.R. Maity, S. Kumar, International Conference on Recent Innovations and Developments in Mechanical Engineering, NIT Meghalaya, Shillong, 2018.
  32. A Decision Making Approach for Selection of Rapid Prototyping Process using MACBETH Method, B. K. Mandal and S. R. Maity, International Conference on “Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness, Birla Institute of Technology, Mesra, Ranchi, 2016.
  33. Spring material selection using PROMETHE-GAIA Method, S. R. Maity, S. Chakraborty, 4th International & 25th All India Manufacturing Technology Design and Research (AIMTDR-2012), Department of Production Engineering, Jadavpur University, Kolkata, 2012.
  34. Turbine Blade Material Selection using Fuzzy TOPSIS Method, S. R. Maity, S. Chakraborty, 5th Internationl Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, 2011.

  1. Biswas Agnimitra, and Das B. (2016). Performance characteristics of simple H-Darrieus vertical axis wind rotor. Published in the conference proceedings of Elsevier conference ICEMS-2016, Jaipur, India. ISBN: 978935254230.
  2. Das B., Jha P., Rezaie B., Gupta R. (2017). Performance Analysis of Single Glazed Solar PVT Air Collector in the Climatic Condition of NE India, Multidisciplinary Digital Publishing Institute Proceedings 2 (4), 171. doi:10.3390/ecea-4-05021
  3. Vishwakarma S., Debnath BK, Debnath K, Das B. (2018). Comparative analysis of absorber tubes of parabolic trough solar collector using therminol vp-1 as heat transfer fluid, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, November 8-10, 2018.
  4. Roy S., Das B., Biswas A., Debnath BK. (2018). Computational analysis of sensible energy storage for low temperature application, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, November 8-10, 2018. https://doi.org/10.1007/978-981-15-0124-1_116
  5. Bhagwat VV, Das B. (2018). Thermal performance of heat pipe with pcm jacket, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, November 8-10, 2018. https://doi.org/10.1007/978-981-15-0124-1_91
  6. Roy K., Das B., Dutta S. (2018). Natural convective heat transfer from an inclined isothermal fin array, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, November 8-10, 2018. https://doi.org/10.1007/978-981-15-0124-1_94
  7. Debnath S., Randive P., Das B. (2018). Numerical investigation on effect of geometrical configuration of absorber plate on heat transfer enhancement in solar air collector. International Conference on Computational Methods for Thermal Problems, Issue 223309, 2018, Page 841. THERMACOMP 2018, 9 July - 11 July 2018.
  8. Gupta A., Choudhury S., Das B., Biswas A., Tiwari GN. (2019). Thin layer drying kinetics and experimental analysis of PVT solar dryer for drying tomatoes. SOLARIS-2019, Feb 7-9, 2019, Jamia Milia Islamia, New Delhi.
  9. Banik SR, Chakraborty B, Majumdar S, Reddy J, Das B, Debbarma S, (2019). Optimization Analysis of a Stand-Alone Hybrid Energy System for the Lecture Hall (New Gallery), NIT Silchar, North East India. International Conference in Recent Trends on Electronics & Computer Science (ICRTECS-2019) 18th-19th March 2019, NIT Silchar.
  10. Barma, S.D., Das, B. and Giri, A. (2011). Effect of load level on the performance of a biodiesel run dual fuel CI engine using second law analysis. Published in the proceeding of the IEEE conference ICUE-2011, Bangkok, Thailand, 28-30 Sep., 2011. DOI:10.1109/ICUEPES.2011.6497779.
  11. Das Biplab, and Gupta Rajat, (2008). Performance Study of a Two-Bladed H-Darrieus Rotor with Various H/D ratios. Published in the Proceedings of REA-2008, Renewable Energy and Environment for Sustainable Environment, IIT Delhi, India, December 11-13, ISBN: 978-81-7319-993-6, pp. 572-578.
  12. Das Biplab, Deb Barma, S., Deb Barma, Sumita, and Lingfa, P. (2008). Mesua Ferrea Oil: An Environmental Friendly Alternative Fuel for Diesel Engine. Published online for International Conference on Energy Security and Climate Change: Issues, Strategies, and Options (ESCC 2008) at Sofitel Centara Grand, Bangkok, Thailand, August 6-8, 2008.
  13. Das Biplab, and Gupta, Rajat, (2008). Comparative Study of a Three-Bladed H-Darrieus Rotor with a Two-Bladed H-Darrieus Rotor with Various H/D Ratio. Published in the Proceeding CD of International Conference on Energy Security and Climate Change: Issues, Strategies, and Options (ESCC 2008) at Sofitel Centara Grand, Bangkok, Thailand, August 6-8, 2008.
  14. Das Biplab, Lingfa, P., Mishra, P., Khan, I., & Saha, A., (2008). Experimental Investigation of Mesua Ferrea Oil as Alternative Fuel. Published in the Proceeding of International Seminar on Non-Conventional Energy Sources and Urban-Rural Economy in Developing Countries (COGEN-2008), Institution of Engineers, Nagpur, February 9-10, pp. 76-79.

  1. S. Dutta, S. Pati, Influence of Thermal Radiation on Natural Convection in a Square Enclosure, Techno-Societal 2020: Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications., at SVERIs College of Engineering, Pandharpur, Maharashtra, December 11-12,2020, Paper No:240.
  2. S. Pabi, S. K. Mehta, S. Pati, Effect of Slip on Vortex Formation near Two-Part Cylinder with Same Sign Zeta Potential in a Plane Microchannel,, Techno-Societal 2020: Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications., at SVERIs College of Engineering, Pandharpur, Maharashtra, December 11-12,2020, Paper No:194.
  3. S. K. Mehta, S. Pati, Analysis of Heat Transfer and Pressure Drop for Pressure Driven Flow of non-Newtonian Fluids through a Serpentine Channel: Influence of Prandtl Number’, Techno-Societal 2020: Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications., at SVERIs College of Engineering, Pandharpur, Maharashtra, December 11-12,2020, Paper No:182.
  4. S. K. Mehta, S. Pati, Thermo-Hydraulic Performance for an Electronic Cooling System Using Porous Material, Techno-Societal 2020: Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications., at SVERIs College of Engineering, Pandharpur, Maharashtra, December 11-12,2020, Paper No:233.
  5. B. Mondal, S. Pati, P. K. Patowari, Assessment of mixing in microchannel with obstacles, International Conference on Energy and Sustainable Development, (ICESD 2020), February 14-15, 2020, Jadavpur University, Kolkata, India, ISBN 978-93-83660-56-8
  6. A. Borah, S. Pati, Effect of non-uniform asymmetric heating on forced convective conjugate heat transfer in a parallel plate microchannel, Proceedings of International Conference on Energy and Sustainable Development, Jadavpur University and The Institution of Engineers, India, pp. 249-252, February 14-15, 2020.
  7. A. Borah, S. Pati, Conjugate heat transfer analysis for flow through microduct subjected to non-uniform heating, International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), National Institute of Technology Silchar, India, Feb 7-9, 2020
  8. S. Dutta, A. K. Biswas, S. Pati, Numerical investigation of natural convection in rhombic porous enclosure saturated with copper water nanofluid with nonlinear heating at the bottom wall, International Conference on Advancements in Mechanical Engineering (ICAME 2020), 18th-20th January 2020. Aliah University Kolkata
  9. A. Chourasia, D. K. Deka, S. Pati, Numerical analysis of steady natural convection from a heated cylinder within a square enclosure with sinusoidally heated bottom wall, International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India.
  10. D. K. Deka, G. C. Pal, S. Pati, Numerical study of unsteady natural convection from a pair of cylinders in an enclosure with sinusoidal bottom wall, International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India.
  11. B. Mondal, S. Pati, P. K. Patowari, Microchannel fabrication with pdms using developed mold by wire-cut electric discharge machining, International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India.
  12. S. K. Mehta, S. Pati, Effect of non-uniform heating on forced convective flow through asymmetric wavy channel, International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India.
  13. Sujith T, S. K. Mehta, S. Pati, Effect of non-uniform heating on electroosmotic flow through microchannel, International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India.
  14. B. K. Kanchan, P. Randive, S. Pati, Numerical investigation on the influence of reactant gas concentration on the performance of a PEM fuel cell, 7th International Conference on Advances in Energy Research (ICAER 2019), December 10-12, 2019, IIT Bombay, Mumbai, India (Accepted)
  15. E. Tripathi, P. K. Patowari, S. Pati, Fabrication of spiral micromixer using mold machined by Co2 assisted laser machine, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), December 12-14, 2019, IIT Indore, Indore, India (Accepted).
  16. D. Bhowmick, S. Chakravarthy, P. Randive, S. Pati, Numerical investigation on the effect of magnetic field on natural convection heat transfer from a pair of embedded cylinders within a porous enclosure, International Mechanical Engineering Congress (IMEC-2019), November 29-December 01, 2019, NIT Tiruchirappalli, India (Accepted).
  17. S. Chakravarthy, P. Randive, S. Pati, Numerical analysis on the influence of jet inclination on the combustion characteristics of a scramjet combustor, International Mechanical Engineering Congress (IMEC-2019), November 29-December 01, 2019, NIT Tiruchirappalli, India (Accepted).
  18. D. K. Deka, S. K. Mehta, S. Pati, Natural Convection Heat Transfer in a Square Cavity with Porous Block of Different Aspect Ratio, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),December 28-31, 2019, IIT Roorkee, Roorkee, India (Accepted), Paper No: 744.
  19. N. R. Nath, M. P. Boruah, S. Pati, P. Randive, Thermophoretic effects on micro particles transport characteristics, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),December 28-31, 2019, IIT Roorkee, Roorkee, India (Accepted), Paper No: 793.
  20. M. P. Boruah, P. Randive, S. Pati, Conjugate Mixed Convection Heat Transfer in a Backward Facing Step Channel, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),December 28-31, 2019, IIT Roorkee, Roorkee, India (Accepted), Paper No: 746.
  21. S. K. Mehta, S. Pati, Numerical study of thermo-hydraulic characteristics for forced convective flow through wavy channel at different Prandtl number, International Mechanical Engineering Congress (IMEC-2019), 29th November- 1st December 2019, NIT Tiruchirappalli, India (Accepted).
  22. S. K. Mehta, S. Pati, Thermo-hydraulic Analysis for Forced Convective Flow through Partially Filled Metallic Porous Wavy Channel Considering Dispersion Effect, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, Roorkee, India (Accepted), Paper No: 771.
  23. B. Mondal, S. Pati, P. K. Patowari, Numerical analysis of mixing performance in microchannel with different ratio of outlet to inlet width, Techno Societal- 2018, 2nd International Conference on Advanced Technologies for Societal Application, at SVERIs College of Engineering, Pandharpur, Maharashtra, 14th - 15th December 2018, Paper No:20.
  24. B. Mondal, S. Pati, P. K. Patowari, Influence of confluence angle between inlets on the mixing performance of micromixer with obstacles, Techno Societal- 2018, 2nd International Conference on Advanced Technologies for Societal Application, at SVERIs College of Engineering, Pandharpur, Maharashtra, 14th - 15th December 2018, Paper No:241.
  25. S. K. Mehta, A. Kumar, S. Pati, Numerical Analysis of Thermo-Hydraulic Transport Characteristics in Wavy Channel with Porous Wavy Slab, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, Mumbai, 10th to 12th December 2018, Paper No:651
  26. D. K. Deka, S. Pati, Effect of Free-stream Parameters on Impinging Shock Wave Boundary Layer Interaction (SWBLI) on a Flat Plate, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, Mumbai, 10th to 12th December 2018, Paper No:510
  27. B. Mondal, S. Pati, P. K. Patowari, Effect of Confluence Angle between Inlets on the Mixing Characteristics in Microchannel, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, Mumbai, 10th to 12th December 2018, Paper No:64
  28. M. P. Boruah, A. Sarker, P. Randive, S. Pati, Effect of Capillarity-Viscosity Interaction on Coalescence of Droplets in a Confined Channel, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, Mumbai, 10th to 12th December 2018, Paper No:518
  29. S. Dutta, A. K. Biswas, S. Pati, Heat transfer enhancement of copper-water nanofluids in a rhombic wavy wall enclosure, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, Mumbai, 10th to 12th December 2018, Paper No:688
  30. D. Bhowmick, P. Randive, S. Pati, Numerical Investigation on Influence of Porous Layer on Fluid Flow and Heat Transfer Characteristics in a Partially Porous Wavy Channel, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, Mumbai, , 10th to 12th December 2018, Paper No:667
  31. D. Bhowmick, P. Randive, S. Pati, Effect of thickness of porous layer on thermo-hydraulic characteristics and entropy generation in a partially porous wavy channel, International Conference on Recent Innovations and Developments in Mechanical Engineering( IC-RIDME 2018) , NIT Meghalaya, Shillong, 8th to 10th November 2018, Paper No:346
  32. S. K. Mehta, S. Pati, Effect on non-uniform heating on heat transfer characteristics in wavy channel, Fifth International Conference on Computational Methods for Thermal Problems THERMACOMP2018, July 9-11, 2018, Indian Institute of Science, Bangalore, INDIA
  33. A. Borah, N. Deka, S. Pati, Effect of non-uniform heating on entropy generation for thermally developing flow between parallel plates , Fifth International Conference on Computational Methods for Thermal Problems THERMACOMP2018, July 9-11, 2018, Indian Institute of Science, Bangalore, INDIA
  34. S. K. Mehta, S. Pati, Thermo-hydraulic analysis for flow through triangular corrugated channel, International Conference on Thermal Analysis and Energy Systems (ICTASE 2018), Hindusthan College of Engineering and Technology, Coimbatore, April 12-13, 2018.
  35. D. Bhowmick, V. Singh, P. Randive, S. Pati, Combined Effects of Offset Ratio and Geometrical configuration on Thermo-hydraulic Transport Characteristics of Turbulent Jet, International Conference on Thermal Analysis and Energy Systems (ICTASE 2018), Hindusthan College of Engineering and Technology, Coimbatore, April 12-13, 2018.
  36. S. Dutta, A. K. Biswas, S. Pati, Effects of non-uniform heating on natural convection within rhombic enclosures: A numerical study, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani Hyderabad campus, Hyderabad, Dec. 27-30, 2017, Paper ID No: IHMTC2017-07-0447, pp. 1-9
  37. S. Dutta, A. K. Biswas, S. Pati, Numerical Analysis of Laminar Natural Convection in a Quadrantal Cavity with Non-uniform heating of Bottom Wall, 1st International Conference on Mechanical Engineering, Jadavpur University, Kolkata, January 04-06, 2018, Paper ID: INCOM18-96, pp,1—4
  38. S. R. Sahoo, S. Pati, Numerical Analysis of Thermo-hydraulic Transport Characteristics inside Raccoon Microchannels, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, MNNIT Allahabad, 15th to 17th December 2016, Paper No:544, pp,1-3
  39. S. Dutta, A. K. Biswas, S. Pati, Analysis of Entropy Generation due to Natural Convection in Rhombic Enclosure, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, MNNIT Allahabad, 15th to 17th December 2016, Paper No:486, pp,1-3
  40. M. Ahuja, N. V. Deshpande, S. Pati, Strength and vibration analysis of transmission housing of a tractor, Sixth international congress on Computational mechanics and simulation (ICCMS2016), IIT Bombay, Mumbai, India, June 27-July 1, 2016, 1135-1138.
  41. S. Pati, P. Kaushik, S. Chakraborty, S. K. Som, Effects of interfacial slip on film condensation over horizontal tubes with progressively increasing radius of curvature in the direction of gravity, 22nd National and 11th ISHMT - ASME Heat and Mass Transfer Conference, IIT Kharagpur, India, December 28-31, 2013.
  42. T. K. Jana, S. Pati, A. Chatterjee, Characteristics Study and Implementation Framework of Holonic Manufacturing Systems, Proceedings of the International Conference on Emerging Mechanical Technology-Macro to Nano(EMTM2N-2007),BITS, Pilani, India, 16-18th February,2007,264-269.

  1. Ashutosh Padhan, Yogesh Singh (2020) DESIGN AND DEVELOPMENT OF A XY POSITIONING STAGE USING SHAPE MEMORY ALLOY SPRING ACTUATOR. International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, India, February 2020.
  2. Shatarupa Biswas, Yogesh Singh and Manidipto Mukherjee (2020) An Over view of Wire Electrical Discharge Machining (WEDM). International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, India, February 2020.
  3. Abhimanyu Pratap Singh, Atanu Paul, Yogesh Singh (2020) Design of a Modular Underwater ROV for Surveillance and Cleaning Purpose. International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, India, February 2020.
  4. Singh D., Choudhury R., Singh Y. (2020) Kinematic, Dynamic and Stiffness Analysis of an Asymmetric 2PRP-PPR Planar Parallel Manipulator. International Conference on Advances in Mechanical Engineering (ICAME-2020), VNIT Nagpur, India, January 2020.
  5. Singh D., Singh Y., Mukherjee M. (2020) Behaviour of NiTi Based Smart Actuator for the Development of Planar Parallel Micro-Motion Stage. International Conference on Advances in Mechanical Engineering (ICAME-2020), VNIT Nagpur, India, January 2020.
  6. Singh D., Choudhury R., Singh Y., Mukherjee M. (2020) Development and Workspace Analysis of Smart Actuation based Planar Parallel Robotic Motion Stage. 3rd International Conference on Advances in Mechanical Engineering (ICAME-2020), SRMIST, Chennai, India, February 2020.
  7. Choudhury R., Singh D., Kumar A., Singh Y. (2020) Design and Fabrication of Android Application Based Grass Cutter Robotic System. International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, India, February 2020.
  8. Singh D., Kumar R., Choudhury R., Padhan A., Singh Y. (2020) Development of Feature Extraction based Currency Recognition System using Artificial Neural Network. International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, India, February 2020.
  9. Choudhury R., Singh D., Kumar A., Singh Y., Sahoo C.K. (2020) Development and Workspace Study of a 4-PP Planar Parallel XY Positioning Stage using SMA actuators. International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020), NIT Silchar, Assam, India, February 2020.
  10. • S. P. Maghade, Y. K. Meena, Yogesh Singh, Santhakumar Mohan, Palani Anand iyamperumal (2013), Design and Simulation of Shape Memory Alloy Spring and its implementation in an Actuator, International Conference on Automation and Mechanical Systems, Faridabad, India, March, 2013.
  11. • Yogesh Singh, C. P. Paul, Santhakumar Mohan, Palani Anand iyamperumal, LM Kukreja (2013), Fabrication and Analysis of Shape memory alloy (Ni-Ti) based Spline and Spring using Laser Rapid Manufacturing for micro positioning device development, IRAM 2013, IIT Indore, India, December, 2013.
  12. • Yogesh Singh, M. Santhakumar (2014), Inverse Kinematic Modelling of a 6-DOF(6-CRS) Parallel Spatial Manipulator, AIMTDR, IIT Guwahati, India, December, 2014.
  13. Yogesh Singh, V. Vinoth, M. Santhakumar (2014), Dynamic modelling and control of a 3-DOF planar parallel robotic (X Y Theta Motion) platform, International conference on Advances in manufacturing and material engineering (ICAMME), NIT Surathkal, 5, 1528-1539. DOI: 10.1016/j.mspro.2014.07.340.
  14. • V. Vinoth, Yogesh Singh, Jayant Kumar Mohanta, M. Santhakumar (2014), Robust disturbance observer based sliding mode control of a planar parallel (3-PPR) manipulator, IEEE Students Conference on Engineering and Systems (SCES), Allahabad, 1-6. DOI: 10.1109/SCES.2014.6880103.
  15. • M. Santhakumar, J. Kim, Y. Singh (2015), A Robust Task Space Position Tracking Control of an Underwater Vehicle Manipulator System, Advances in Robotics, Goa, India, July 2015.
  16. • Yogesh Singh, M. Santhakumar (2015), Comparative kinematic and dynamic performance analysis of planar parallel manipulators, Advances in Robotics, Goa, India, July 2015.
  17. • Yogesh Singh, Santhakumar Mohan (2015), PID-like fuzzy logic control scheme for control of a planar parallel (3PPR U-base) manipulator, 2nd International and 17th National Conference on Machines and Mechanisms, IIT Kanpur, Article No. 5. DOI: 10.1145/2783449.2783454.
  18. • Yogesh Singh, Santhakumar Mohan (2016), Kinematic performance analysis of a new 2PRP-PRR planar parallel robotic manipulator, The Fourth Joint International Conference on Multibody System Dynamics, Montréal, Québec, Canada, June 2016.
  19. • Yogesh Singh, M. Santhakumar (2017), Development of a Planar 3PRP Parallel Manipulator using Shape Memory Alloy Spring based Actuators, Advances in Robotics, IIT Delhi, India, June 2017.

  1. Bipul Das, Jasper Ramon, Machine learning and real time signal features integration for strength modelling in friction stir welding process, International Conference on Recent Advances in Manufacturing (RAM 2021), SVNIT Surat, June 10-12, 2021.
  2. Mehdi Mehtab Mirad, Bipul Das, Numerical analysis of tool material in ultrasonic machining process, International Conference on Recent Advances in Manufacturing (RAM 2021), SVNIT Surat, June 10-12, 2021.
  3. Dhiraj Raj, Saikat Ranjan Maity, Bipul Das, Investigation of temperature distribution in low power laser cladding of nickel through numerical analysis, International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), NIT Silchar, February 7-9, 2021.
  4. Mehdi Mehtab Mirad, Jiomani Talukdar, Bipul Das, Analysis of tool defect in ultrasonic machining process through numerical modelling, International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), NIT Silchar, February 7-9, 2021.
  5. Mehdi Mehtab Mirad, Sandip Mandal, Bipul Das, Fabrication and evaluation of mechanical properties of stir cast AL6061 fly ash composite, International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), NIT Silchar, February 7-9, 2020.
  6. Anirban Dutta, John Deb Barma, Bipul Das, Mathematical modelling of wire electrical discharge machining process by applying response surface analysis, International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), NIT Silchar, February 7-9, 2020.
  7. Bipul Das, Manebendra Das, Ashish Meena, Mehdi Mehtab Mirad, Artificial intelligence based defect formation tendency prediction in friction stir welding, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), IIT Indore, December 12-14, 2019. (Received Best Paper Award)
  8. Manabendra Das, Ashish Meena, Bipul Das, Sensor fusion model for defect identification in friction stir welding process, 2nd International Conference on New Frontiers in Engineering Science & Technology (NFEST 2019), February 18-22, 2019, NIT Kurukshetra.
  9. Bipul Das, Sukhomay Pal, Swarup Bag, Weld defect identification in friction stir welding using power spectral density, International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), 28th - 29th November, 2017, Dubai.
  10. Bipul Das, Sukhomay Pal, Swarup Bag, Machine vision system based monitoring approach for friction stir welding process. IEEE First International Conference on Control, Measurement and Instrumentation (CMI), 8-10 January 2016. DOI: 10.1109/CMI.2016.7413715.
  11. Bipul Das, Sukhomay Pal, Swarup Bag, Wavelet transform based defect identification in friction stir welding process. 6TH International and 27TH All India Manufacturing Technology, Design and Research Conference, 16-18 December, 2016.
  12. Bipul Das, Sukhomay Pal, Swarup Bag, Neurofractal modelling of weld quality in friction stir welding. 2nd International Conference on Advances in Cutting, Welding and Surfacing (CWS), 05-07 August 2015. (Received best paper award)
  13. Bipul Das, Sukhomay Pal, Swarup Bag, Monitoring of friction stir welding process through signals acquired during the welding. 5TH International and 26TH All India Manufacturing Technology, Design and Research Conference, 12-14 December, 2014.

  1. Chinmaya Kumar Sahoo, Jageshwar Kumar Sahu, and Manoj Masanta. "Effect of Pulsed Nd: YAG Laser Parameters in Preplaced TiC Coating on Aluminium Substrate."5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IIT Guwahati, Assam, India: 255-1-255-6.

  1. Abhishek Paul, RajsekharPanua, Probir Kumar Bose, Rahul Banerjee; An experimental study of performance and emission parameters of a compression ignition engine fueled by different blends of Diesel-Ethanol-biodiesel; International Conference on Energy Efficient Technologies for Sustainability (ICEETS), 2013.DOI- 10.1109/ICEETS.2013.6533485.

  1. Rajeev Nayan Gupta and A.P.Harsha. Antiwear performance of chemically modified sunflower oil with CeO2 nanoparticle as an additive. International Conference on Industrial Tribology (ICIT-2017).
  2. Rajeev Nayan Gupta and A.P.Harsha. Tribological evaluation of calcium-copper-titanate and cerium oxide nano-additives in paraffin oil. World Tribology Conference (WTC-2017). page 65.


  1. P R Dash, M Pradhan, A Bisoi, Parametric instability of an asymmetric sandwich beam with thermal gradient under various boundary conditions by computational method, Procedia Engineering 144 (2016) 900 – 907.
  2. M.Karthikeyan, A. Bisoi, A.K.Samantaray, R.Bhattacharyya, Sommerfeld Effect Characterisation in Rotors with Non-ideal Drive from Ideal Drive Response and Power Balance, Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM2013), IIT Roorkee, India.
  3. Alfa Bisoi, Saurabh K. Bharti, A.K.Samantaray, R.Bhattachharyya, Sommerfeld Effect Characterization in Anisotropic non-ideal rotor system, ICOVP, 13th International Conference on Vibration Problems 29th November – 2nd December, 2017, Indian Institute of Technology Guwahati, INDIA.
  4. Alfa Bisoi, Lakshman , A.K.Samantaray, R.Bhattacharyya, Sommerfeld effect characterisation in multi-disk rotor dynamic system with non-ideal drive through semi-analytical methods, Proceedings of ICTACEM (2014), International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur, India

  1. Pallavi Chauhan and Sushant Negi, “Natural Fiber reinforced polymer composites- A review”, 9th Indian Youth Science Congress (7-9 April 2018), Career Point University Hamirpur, HP.
  2. Sushant Negi, Pallavi Chauhan, Nitin Sharma and Ashwani Tayal, “Effect of procees parameters on density of parts fabricated by SLS,” Recent Advances and Research Innovations in Engineering and Technology (17-18 Nov 2017), AP Goyal Shimla University, Shimla.
  3. Ashwani Tayal, Saurabh Kango and Sushant Negi “Study of process parameters for finishing of tube by magnetic tool”, International Conference on Emerging and Futuristic Trends in Engineering & Technology (8-9 May 2015), Maharaja Agrasen University, Baddi.
  4. Sushant Negi and Rajesh K Sharma, “A research on optimizing process parameters for SLS process”, International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues (December 22-24, 2014), NIT Hamirpur, Himachal Pradesh.
  5. Sushant Negi, Suresh Dhiman and Rajesh K Sharma, “Influence of process parameters on mechanical properties of parts fabricated by selective laser sintering”, International Conference on Additive Manufacturing Technologies - AM 2014 (1-2 September 2014), Bangalore.
  6. Sushant Negi, Suresh Dhiman and Rajesh K Sharma, “Influence of laser sintering parameters on surface roughness of polymer products”, Proceedings of ICAT-14, NIT Calicut (21-24 February 2014), Kerala
  7. Sushant Negi, Suresh Dhiman and Rajesh K Sharma, “Investigating the hardness of glass filled polyamide parts produced by SLS process”, International Conference on Additive Manufacturing Technologies - AM 2013 (7-8 October 2013), Bangalore.
  8. Sushant Negi, Suresh Dhiman and Rajesh K Sharma, “The use of additive manufacturing to support engineering and medical applications”, 3rd International Conference on Production and Industrial Engineering (29-31March 2013), NIT Jalandhar, Punjab.
  9. Nitin Sharma, Sushant Negi, Saurabh Kango and Rajesh Kumar Sharma, “Experimental analysis of fluid film pressure distributions of a surface textured hydrodynamic journal bearing” 3rd International Conference on Production and Industrial Engineering (29-31March 2013), NIT Jalandhar, Punjab.

  1. • Effect of arc-current and spray distance on elastic modulus and fracture toughness of thermally sprayed chromium oxide coatings, Simanchal Kar, P P Bandyopadhyay and S. Paul, ITS-IFToMM 2017 & K-TIS 2017, March 19-22, 2017, Jeju, Republic of South Korea
  2. • Effect of arc-current and particle morphology on fracture toughness of plasma sprayed aluminium oxide coating, MSEC 2017, June 4-8 (2017), University of Southern California. ISSN: 978-0-7918-5072-5
  3. • Investigations into dynamic effects during forging of silicon carbide particulate reinforced LM6 aluminium alloy composite preforms, S. Kar, P. Chandrasekhar, S. Singh and G. Sutradhar, ICAMMP-2011, Ref No.-130, IIT Kharagpur, India

  1. Vinyas M and Kattimani, S.C., “Higher order FEA for free vibration of hygrothermo-magneto-electro-elastic plates”. Oral presentation delivered at 7th IES, Kumamoto University, Japan, March 2018.
  2. Vinyas M, Piyush, J.S. and Kattimani, S.C. “A fully coupled FE formulation for the free vibration and static analysis of functionally graded magneto-thermo- electro- elastic plates”. DOI: https://doi.org/10.15651/978-88-938-5041-4Oral presentation delivered at ICCS-20, Conservatoire National des Arts et Métiers, Paris, September 2017.(ISSN= 2421-2822)
  3. Vinyas M, Piyush, J.S. and Kattimani, S.C. “Static response of functionally graded magneto-electro- elastic plates subjected to thermal, electric and magnetic loads”. DOI: https://doi.org/10.15651/978-88-938-5041-4 Oral presentation delivered at ICCS-20, Conservatoire National des Arts et Métiers, Paris, September 2017.(ISSN= 2421-2822)
  4. Vishwas, M., Basavaraj, C. K and Vinyas M (2018), “Experimental Investigation using Taguchi Method to Optimize process parameters of fused deposition modeling for ABS and Nylon materials”. Mater. Today. Proc. 5, 7106-7114. DOI: https://doi.org/10.1016/j.matpr.2017.11.375. (ISSN= 2214-7853)
  5. Vinyas M and Kattimani, S.C. (2018), “Influence of Coupled Material Properties of BaTiO3 and CoFe2O4 on the Static Behaviour of Thermo Mechanically Loaded Magneto-Electro-Elastic Beam”. Mater. Today. Proc. 5, 7410-7419. DOI: https://doi.org/10.1016/j.matpr.2017.11.412. (ISSN= 2214-7853)
  6. Craveiro D.S, Loja M.A.R, Vieira L,Vinyas M (2019), “An Optimization Strategy for Customized Radiotherapy Head Immobilization Masks”, IEEE 6th Portuguese Meeting on Bioengineering (ENBENG), Lisbon, Portugal, 1-4. DOI: 10.1109/ENBENG.2019.8692572
  7. Kattimani SC, Joladarashi S, Vinyas M, “Geometrically nonlinear vibration attenuation of functionally graded magneto-electro-elastic shells”. DOI: https://doi.org/10.1115/SMASIS2019-5533. Oral presentation delivered at SMASIS2019, September 9-11, 2019, Louisville, KY, USA
  8. S. Praveen Kumar, M. Shantharaja, and Vinyas M,“The effect of reinforcements on mechanical properties of A7005 hybrid MMCs”, AIP Conference Proceedings 2204, 040021. DOI: https://doi.org/10.1063/1.5141594(ISSN=1551-7616) Oral presentation delivered at ERCAM-2019, July 25th – 26th, 2019, Bangalore, India.
  9. Pradeep V. Badiger, Vijay Desai, M. R. Ramesh, Vinyas M,C. M. Santhosh, B. K. Prajwala, and L. Raveendra, “Influence of Ti coated tools on process parameters in turning process of MDN431”, AIP Conference Proceedings 2204, 040019. DOI: https://doi.org/10.1063/1.5141592(ISSN=1551-7616) Oral presentation delivered at ERCAM-2019, July 25th – 26th, 2019, Bangalore, India
  10. Mahesh L, Sudheer J, Jagadeesh LR, Vinyas M, “The study of microstructure and wear behaviour of titanium nitride reinforced aluminum composites”, AIP Conference Proceedings 2204, 040014.DOI: https://doi.org/10.1063/1.5141587(ISSN=1551-7616). Oral presentation delivered at ERCAM-2019, July 25th – 26th, 2019, Bangalore, India.
  11. M. A. R. Loja, A. Carvalho, J. P. Neto, T. A. N. Silva, and Vinyas M, “A Bayesian approach to predict the structural responses of FGM plates with uncertain parameters”, AIP Conference Proceedings 2204, 040013. DOI: https://doi.org/10.1063/1.5141586(ISSN=1551-7616)Oral presentation delivered at ERCAM-2019, July 25th – 26th, 2019, Bangalore, India
  12. Costa D.M.S, Loja M.A.R, Vinyas M, “Metaheuristic optimal design of adaptive composite beams”, AIP Conference Proceedings 2204, 040012. DOI: https://doi.org/10.1063/1.5141585(ISSN=1551-7616).Oral presentation delivered at ERCAM-2019, July 25th – 26th, 2019, Bangalore, India
  13. Vinyas M, Hemanth NR, Kattimani SC, Chethan VN, “Hygrothermal Response Analysis of MEE Beam Embedded In Adaptive Wood through FE Methods”, AIP Conference Proceedings 2204, 040007. DOI: https://doi.org/10.1063/1.5141580 (ISSN=1551-7616). Oral presentation delivered at ERCAM-2019, July 25th – 26th, 2019, Bangalore, India