NATIONAL INSTITUTE OF TECHNOLOGY SILCHAR

राष्ट्रीय प्रौद्योगिकी संस्थान सिलचर

Department of Mechanical Engineering

National Conferences



  1. Geeta Kumari, K.M.Pandey and A.K.Pandey, Innovative practices in performance appraisal in industries in India, National Conference on ‘Innovations in Business Horizons’ Department of Business Administration, Gurgaon Institute of Technology and Management, March 05 2010.
  2. Geeta Kumari, K.M.Pandey and A.K.Pandey, Energy Management in changing business scenario, National Conference on ‘Innovations in Business Horizons’ Department of Business Administration ,Gurgaon Institute of Technology and Management, March 05 2010 .
  3. Geeta Kumari, K.M.Pandey and A.K.Pandey, Management of technical education in India: an overview, National Conference on ‘Innovations in Business Horizons’ Department of Business Administration ,Gurgaon Institute of Technology and Management, March 05 2010.
  4. K.M.Pandey, S.Deb Verma, A.P.Singh, Akhilesh Kumar and U.Kumar, Computational analysis on controlling noise pollution from internal combustion engines, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  5. K.M.Pandey,P.L.Chaudhury, A.P.Singh, and Prateek Srivastava, CFD analysis of a journal bearing with fluent software, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  6. K.M.Pandey, A.P.Singh, Ankur, Sourav Gupta, R.Sudarsan and Issac, Computational analysis of noise pollution in a four cylinder Diesel engine with Fluent software, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  7. K.M.Pandey, A.P.Singh, P.L.Chaudhary, V.Bahuguna and Akhilesh Kumar, Some theoretical studies on gas foiled bearings, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19, 2009.
  8. K.M.Pandey, A.P.Singh, S.Pahari, and Prateek Srivastava, Flow analysis of convergent-divergent nozzle of minimum angle of divergence at Mach 3 using fluent software, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  9. K.M.Pandey, A.P.Singh, S.Pahari and Akhilesh Kumar, Flow analysis of convergent-divergent nozzles of maximum angle of divergence using fluent software at Mach 5, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  10. K.M.Pandey, S.Deb Verma, A.P.Singh, Akhilesh Kumar and U.Kumar, Computational analysis on controlling noise pollution from internal combustion engines, 7th national conference in modern trends in power engineering and power plants, department of mechanical engineering, college of engineering , Trivandrum, Kerala, 8-9 October 2009, PP 129-140.
  11. Geeta Kumari and K.M.Pandey, Recent advances in software technology related to mechanical engineering-accepted for presentation in 7th national conference in modern trends in power engineering and power plants, department of mechanical engineering, college of engineering , Trivandrum, Kerala, 8-9 October 2009.
  12. K.M.Pandey An analysis of flow development in a rectangular draft tube of reaction turbine with fluent software- 7th national conference in modern trends in power engineering and power plants, department of mechanical engineering, college of engineering, Trivandrum, Kerala, 8-9 October 2009, PP 35-41, and the presentation was considered one among top five presentations in the conference.
  13. Sanjay Pandey, Rajneesh Kumar, K.M.Pandey and L.Roy, FEA analysis of frame without cover plate, National conference on welding technology, Department of Mechanical Engineering, SLIET, Longowal, Punjab, February 13-14,2009
  14. Sanjay Pandey, Rajneesh Kumar, K.M.Pandey and L.Roy, Static strength analysis using finite element method, National conference on welding technology, Department of Mechanical Engineering, SLIET, Longowal, Punjab, February 13-14,2009.
  15. K.M.Pandey, S.Pahari, P.Satpathy, S.Das and S.Kumar, Numerical Studies on supersonic flow over a few blunt shaped bodies using fluent software, national conference on advances in mechanical engineering, department of mechanical engineering, Don Bosco Institute of Technology, Mysore road, Kumblagodu, Bangalore, March 30-31, 2009,PP 88-100.
  16. S.K.Yadav and K.M.Pandey, Studies on rocket nozzle with fluent software, national conference on advances in mechanical engineering, department of mechanical engineering, Don Bosco Institute of Technology, Mysore road, Kumblagodu, Bangalore, March 30-31, 2009PP.21-26..
  17. Virendra Kumar and K.M.Pandey, Studies on supersonic free single jet flow a numerical analysis with fluent software, national conference on advances in mechanical engineering, department of mechanical engineering, Don Bosco Institute of Technology, Mysore road, Kumblagodu, Bangalore, March 30-31, 2009PP.72-76.
  18. Amitabh Roy and K.M.Pandey, Numerical analysis of combustion chamber design of turbojet engine with fluent software, national conference on recent advances in mechanical engineering, department of mechanical engineering, NIT Silchar, Assam , December 20-21, 2008, PP 213-217.
  19. S.Pahari, P.S.Satpathy, S.Das, S. Kumar and K.M.Pandey, Numerical studies on supersonic flow over a wedge shaped body using fluent software, national conference on recent advances in mechanical engineering, department of mechanical engineering, NIT Silchar, Assam , December 20-21, 2008, PP 159-163.
  20. P. Anand, A.P.Singh and K.M.Pandey, An analysis on flow development in a conical draft tube of reaction turbine with fluent software, Fluid mechanics and fluid power conference at PES Academy Bangalore, Dec. 11-13, 2008.
  21. K.M.Pandey and A.P.Singh, Pressure loss in a suddenly expanded duct with cavity at Mach 1.74 from De Laval nozzle at cavity aspect ratio 1,Fluid mechanics and fluid power conference at PES Academy Bangalore, Dec. 11-13, 2008
  22. K.M.Pandey and A.P.Singh, Flow development in a suddenly expanded duct with cavity at Mach 1.74 from De Laval nozzle at cavity aspect ratio 1,Fluid mechanics and fluid power conference at PES Academy Bangalore, Dec. 11-13, 2008.
  23. K. M. Pandey and M.Mahesh, Management of technical education in India: An Overview, National Conference on management of technical education in new millennium, Media centre and continuing education centre, National Institute of Technical Teachers Training and Research, Sector 26, Chandigarh – 160019, November 16 – 18 2005.
  24. K. M. Pandey and M.Mahesh, Management of technical education in India: An Overview, National Conference on management of technical education in new millennium, Media centre and continuing education centre, National Institute of Technical Teachers Training and Research, Sector 26, Chandigarh – 160019, November 16 – 18 2005.
  25. Sanjay Pandey K.M.Pandey and P.L.Chaudhary, Static strength analysis using finite element method for water tank with belt using software ansys design space 6.1/7.1,National conference on advances in engineering design, department of mechanical engineering, NIT Hamirpur, 13-14 November 2008.
  26. Sanjay Pandey K.M.Pandey and P.L.Chaudhary, Static strength analysis using finite element method for water tank with belt using software ansys design space 6.1/7.1,National conference on advances in engineering design, department of mechanical engineering, NIT Hamirpur, 13-14 November 2008.
  27. Geeta Kumari, K.M.Pandey, P.L.Chaudhary, Disaster management for tourism : An overview, National seminar on earthquake hazard and disaster management of north-eastern states of India, Department of civil engineering, NIT Silchar, Assam, India , 18-20 October 2008, PP 427.
  28. Geeta Kumari, K.M.Pandey, P.L.Chaudhary, Management of hydro-electric power plants: An overview, National seminar on earthquake hazard and disaster management of north-eastern states of India, Department of civil engineering, NIT Silchar, Assam, India , 18-20 October 2008, PP 48-59.
  29. K.M.Pandey and A.P.Singh, Computational studies on total pressure loss at Mach 1.74 in suddenly expanded ducts with Fluent software, National Conference on Advances in fluid flow and thermal sciences (AFFTS2008), Department of Mechanical Engineering, SVNIT Surat, India, May 22-24, 2008, PP. D-79 to D-87..
  30. K.M.Pandey, D.H.Das, A.Ghoshal, M.Agarwal and G.Goswami, Modelling of a two dimensional combustion chamber having one inlet with Fluent software, Proceedings of National Conference on Advances in fluid flow and thermal sciences( AFFTS2008) , Department of Mechanical Engineering, SVNIT Surat, India , May 22-24, 2008,PP.A-20 to A-30.
  31. K.M.Pandey and P.L.Chaudhary, Environmental effects of hydro-electric power plants: an overview, presented in National workshop on engineering materials and equipments, NIT Silchar and Institute of public health engineers, India, Feb.15-16, 2008.
  32. K.M.Pandey and P.L.Chaudhary, Nuclear waste disposal and the effects on ground water pollution, presented in National workshop on engineering materials and equipments, NIT Silchar and Institute of public health engineers, India, Feb.15-16, 2008
  33. Pandey K.M., attended a seminar on strategic partnership program among National Institutes of Technologies Vis-à-vis Research and Academics, NIT Warangal, November 24-25, 2007.
  34. K.M.Pandey and Abhishek Kumar, An analysis of Vocational and Technical Education for Persons with Disabilities with emphasis on North East Region, National seminar on enhancing access and performance of disadvantaged sections of society in technical and vocational education, Media and continuing education centre, NITTTR, Chandigarh. March 22-23, 2007.
  35. Jagannath, N.G.Naresh, G.Sharma and K.M.Pandey, , Pressure loss in sudden expansion in flow through nozzles at Mach 1.74: a fuzzy logic approach, National Conference on recent advances in mechanical engineering, department of mechanical engineering, Baba Sahab Bhim Rao Ambedkar College of Agril Engg. And Technology, Etawa (U.P.) 28-29 March 2007
  36. Mohnish Kumar, Sushil Kumar, Amit Kumar and K.M.Pandey, Pressure loss in sudden expansion in flow through nozzles at Mach 2.75: a fuzzy logic approach, National Conference on recent advances in mechanical engineering, department of mechanical engineering, Baba Sahab Bhim Rao Ambedkar College of Agril Engg. And Technology, Etawa (U.P.) 28-29 March 2007.
  37. K.Deb, U. Kumar and K.M.Pandey, Noise reduction techniques in internal combustion engines: a review, National Conference on recent advances in mechanical engineering, department of mechanical engineering, Baba Sahab Bhim Rao Ambedkar College of Agril Engg. And Technology, Etawa (U.P.) 28-29 March 2007.
  38. Geeta Kumari, Vandana Sharma and K M Pandey, Advances in software technology management, presented in a national seminar on business transformation through technological integration, PIMT, Mandi Gobindgarh , Punjab,30 April 2007.
  39. Geeta Kumari, Vandana Sharma and K M Pandey, Advances in human resource management, presented in a national seminar on emerging trends in ICT enabled services, PIMT, Mandi Gobindgarh , Punjab,26 October 2006.
  40. K. M. Pandey and M. Ray, Experimental studies on heat transfer characteristics on circulating fluidized beds, Proceedings of National Conference on recent developments and future trends in mechanical engineering, N I T Hamirpur, India, Nov. 3-4, 2006 pp 33-45.
  41. K. M. Pandey and M.Mahesh, Steady state temperature distribution in a nuclear fuel rod, National conference on Mathematical and Computational Modelling, Department of Mathematics and Computer Applications. P S G College of Technology, Coimbatore, December 15-16, 2005.
  42. K. M. Pandey, K. Yadav and SBL Sachan, Empowering masses through Technology Applications and skills, National Seminar cum exhibition on empowering the masses through technology, Rural Development Department, National Institute of Technical Teachers Training and Research, Sector 26, Chandigarh – 160019, December 1 – 2, 2005.
  43. Sanjay Pandey and K.M.Pandey, Calculation of stresses and deformations based on finite element method for a.v.e. standard cabin using software ansys design space 7.1,All India Seminar on Emerging Trends in Mechanical Engineering, The Institution of Engineers(I) Haryana State Centre, NIT Kurukshetra,March 29-30 2005
  44. Pandey K. M. and Kumari Geeta, Recent advances in multimedia and web technology and it’s usefulness in web based education system, National Convention of Computer Engineers, Institution of Engineers, Kerala State Centre, Trivandrum, March 12-13, 2005.
  45. K.M.Pandey and M. Mahesh, Recent developments in India in wind energy system and the management: an overview, National Conference on Mechanical Engineering, Ghousia College of Engg, Department of Mechanical Engineering, Ramanagaram-571511, March11-12, 2005.
  46. K.M.Pandey, P.M.Boro, S.B.L.Sachan and K.C.Satpathy, Recent advances in information technology and information management: the Indian Scenario, presented in national seminar on ICT enabled education, National Institute of Technical Teachers Training and Research, Chandigarh, 17-18 Nov. 2004.
  47. K.M.Pandey, A.K.Pandey and S.B.L.Sachan, The impact of ICT on development of digital library system: an overview, presented in national seminar on ICT enabled education, National Institute of Technical Teachers Training and Research, Chandigarh, 17-18 Nov. 2004.
  48. K.M. Pandey and V.K. Sinha, Impact of technology on library services: A case study of academic library in China, training programme on IT applications in information management: issues, trends and challenges, NIT Silchar, March 1-10, 2004, pp 94-103.
  49. K.M. Pandey, Designing a library staff compute training programme: A case study of central library of NIT Silchar, training programme on IT applications in information management: issues, trends and challenges, NIT Silchar, March 1-10, 2004, pp 78-93.
  50. K.M.Pandey, Usage of renewable energy: a solution for environmental pollution control, National Seminar on Environment and Health, S.V.U. Engg. College Tirupati, Dec. 29-30, 2003.
  51. K.M.Pandey, Recent advances in air pollution control by using non-conventional energy systems, All India Seminar on Green Technology-Present and Emerging Need, The Institution of Engineers (India), West Bengal State Centre, Kolkata, Nov. 21-22, 2003.
  52. K.M. Pandey, V.K. Sinha and A.K. Pandey, Impact of Technology on library Services: A Case Study of Academic Library in China, National Seminar on Challenges in Delivering Quality Services in Management and Technical Libraries, April 25-26, 2003, T.A. Pai Management Institute, Manipal, Karnataka, India.
  53. K.M. Pandey, V.K. Sinha and D.Kumar, Recent Advances in Library Technology, SiS 2003 Proceedings, 21st Annual Convention and Conference, Society for Information Science, 9-11 April 2003, Central Library, Indian Institute of Technology, Roorkee, India, Vol.2, pp 511-524.
  54. K.M. Pandey and A.K. Pandey, Enhancement of Quality of Technical Education by Providing Digital Library: A Case Study of Central Library of NIT Silchar, SiS 2003 Proceedings, 21st Annual Convention and Conference, Society for Information Science, 9-11 April 2003, Central Library, Indian Institute of Technology, Roorkee, India, Vol.1, pp153-162.
  55. Pandey K M and Pandey A K, Impact on health of usage of non conventional energy system for controlling environmental pollution: - A case study of Silchar city, Fourth National Conference on Thermal systems, Department of Mechanical Engineering, BHUIT, Varanasi, India, Feb 22-23, 2003.
  56. Pandey K M, Strategic planning of technical institutions: limitations and remedies, reported to 90th Indian Science Congress, Bangalore University Bangalore, Jan 3-7, 2003.
  57. Pandey K M and Pandey A K, Health effects of air pollution due to non-conventional power generation: a case study of Silchar city, reported to 90th Indian Science Congress, Bangalore University, Bangalore, Jan 3-7, 2003.
  58. Dharmendra Kumar and Pandey K M, Studies on acyclic diagraphs and decyclization-presented in 89th Indian Science Congress, Computer Sciences Section, Lucknow University Lucknow, Jan 3-7, 2002. The paper was given 1st prize in poster presentation.
  59. Pandey A K and Pandey K M, Studies on air pollution from automobiles; an overview, presented in National Seminar on Energy and Environment, Anand Engineering College Agra, Dec 21-22, 2001.
  60. Dutta Pinak and Pandey K M, Analysis of turbulent flow over a backward facing step channel using NISA / 3D fluid finite element technique, presented in 46th Congress of Indian Society of Theoretical and Applied Mechanics, Department of Mechanical Engineering, REC Hamirpur (H.P.), Dec 19-22, 2001.
  61. Pandey A K and Pandey K M, Environmental characteristics of liquefied natural gas and liquefied petroleum gas and its effect on air pollution, accepted in National Conference on Recent Trends in Mechanical Engineering Research and Development, Department of Mechanical Engineering, JNTU College of Engineering, Anantapur (A. P.), Oct 18, 2001
  62. Pandey K M, Variation of pressure and lift coefficient as a function of angle of attach using vortex based Panel method for Jukowski aerofoil, 15th National Convention of Aerospace Engineers, Dept of Aerospace Engg. And Rocketry, BIT Mesra, Ranchi, Feb 23 -24, 2001, pp III.3 to III.3.5.
  63. Pandey K M, Influence of cavities on flow development in sudden expansion: a comparison between supersonic and subsonic flow regime, 15th National Convention of Aerospace Engineers, Dept of Aerospace Engg and Rocketry BIT Mesra, Ranchi.
  64. Pandey K M and Sharma K K, A review on recent advances in wind energy system, 3rd National Conference in Thermal Systems, Dept of Mech. Engg. BHUIT, Varanasi, Feb 17-18, 2001.
  65. Pandey K M, Computer aided design of pumps installed at Hindustan Paper Corporation Cachar Paper Mill, Assam, 3rd National Conference on Thermal System, Dept of Mechanical Engg. BHUIT, Varanasi, Feb 17-18, 2001.
  66. Pandey K M and Pandey S N, Status and problems of pumps in a paper mill: a case study of H.P.C. Panchgram, Cachar Paper Mill, Assam, 3rd National Conference on Thermal System, Dept of Mech. Engg. BHUIT, Varanasi, Feb 17-18, 2001.
  67. Pandey K M and Sharma K K, Recent advances in wind turbine: a review, National Seminar on Trends for Development of Regional Areas of Country with Limited Resources, Kumaon Engg. College Dwarahat, Almora (U.P), April 28-29, 2000.
  68. Pandey K M , S A Khan and Rathakrishnan E, Passive control of base flows, Proceedings of the National Seminar on Recent Advances in Experimental Mechanics, Dept of Aerospace Engg, IIT Kanpur, Mar 15-16, 2000, Allied Publications Ltd, New Delhi, India 2000 PP-57-71, ISBN – 81-7764-020-8.
  69. Pandey K M, Influence of hub tip ratio on design of propeller turbines of 2kW and 5kW output at Ultra low heads, 44th Congress of Indian Society of Theoretical and Applied Mechanics, Department of Mathematics and Humanities, REC Warangal, Dec 22-25, 1999.
  70. Pandey K M, Feasibility studies of wind power generation in Silchar Region, National Conference on Wind Energy Commercialisation NCWEC-99, Department of Mechanical Engineering, MACT Bhopal, Mar 5-6, 1999.
  71. Pandey K M, Effect of hub tip ratio on flow turning angle at varying speed of 1kW propeller turbine, 43rd Congress of Indian society of Theoretical and Applied Mechanics, Department of Mathematics and Computer Application, PSG College of Technology, Coimbatore, Dec 16-19, 1998.
  72. Pandey K M, Electric energy management of ultra low head hydroelectric power projects, All India Seminar on Electric Energy System Management-Indian Scenario, Department of Electrical Engineering, University of Roorkee, Roorkee, Sept 4-5, 1998, pp 6-9.
  73. Pandey K M, Pressure loss in flow through nozzles with sudden expansion: a case study in supersonic flow regime-23rd National Conference of Fluid Mechanics and Fluid Power, Civil Engg. Dept, MACT, Bhopal Dec 27-29, 1996.
  74. Pandey K M, Base flow in flow though nozzles with sudden expansion: a study in supersonic regime-2nd National Conference on Fluid Machinery, Dept of Mechanical Engg, PSG College of Technology, Coimbatore, India, June 28-29, 1996, pp 256-265, Allied publishers Ltd. New Delhi, India, 1996, ISBN- 81-7023-543-X.
  75. Pandey K M, Dhar N G and Pandey S K, Feasibility studies of micro hydel power plant at REC Silchar, National seminar on Power Scenario in India, Electrical Engg. Department, REC Hamirpur, India, 14-15 Oct, 1995.
  76. Pandey K M and Rathakrishnan E, Studies on base pressure oscillations in sudden expansion with passive control, Conference on Thermal System, Mech. Engg. Dept, BHUIT Varanasi, Jan 28-30, 1995.
  77. Pandey K M, Variation of base pressure in compressible subsonic regime of flow, 2nd National Conference on Thermal System, Mech. Engg. Dept, BHUIT Varanasi, Jan 28-30, 1995.
  78. Pandey K M and Rathakrishnan E, Base pressure Oscillation in sudden expansion with passive control, proceeding of national conference on fluid machinery, Department of production and machine tool engineering K.I. Somaiya College of Engineering Vidyabihar, Bombay, India, Mar 11-13, 1994, pp G10-1 to G10-7.
  79. Pandey K M and Rathakrishnan E, Pressure loss in sudden expansion with passive control, proceedings of national conference on Fluid Machinery, Department of Production and Machine Tool Engineering, K.I. Somaiya College of Engineering Vidyabihar, Bombay, India, Mar 11-13, 1994, pp G9-1-G9-5.
  80. Pandey K M, Studies on minimum fluidising velocities of large size wood charcoal particles, National Symposium on Experiment in Fluids, Department of Aerospace Engineering, IIT Kanpur, Uttar Pradesh, India, Dec 28-31, 1992, pp 266-275.
  81. Pandey K M and Gupta S N, Fluidisation of large size coal particles at moderate temperature, National Symposium on experiments in fluids, Department of aerospace engineering, IIT Kanpur, Uttar Pradesh, India, Dec 28-31, 1992, pp 180-187.
  82. Pandey K M, Studies on variation of vortex strength as a function of angle of attack using vortex based panel method for Jukowski aerofoil, National Symposium on Optimisation Techniques and Application, OPTEC-Ns92, Thiagrajar College of Engineering, Madurai, Tamil Nadu, India, July 2-3, 1992.

  1. Deb B., Gupta R., and Misra R.D., 2013, “Experimental Analysis of a 10° Helical Savonius Rotor at different overlap conditions”. Energy System Modeling and Optimization Conference (ESMOC 2013), December 9-11 at National Institute of Technology-Durgapur, India
  2. Misra, R.D. and Murthy, M.S., 2011, " The Application of Energy and Exergy Analyses to Identify Suitable Blend of Karanja Biodiesel and Diesel for Usage in Compression Ignition Engine”, In the Proceedings of the 2nd National Seminar on “Renewable Energy Technology: Issues and Prospects”, NERIST, Nirjuli, India, Sept. 2-3, pp. 627-632.
  3. Misra, R.D. and Sahoo, P.K., 2009, "Thermoeconomic Optimization of a Vapour Compression Refrigeration System using Evolutionary Programming”, In the Proceedings of the National Conference on Refrigeration and Air Conditioning (NCRAC 2009), IIT Madras, Chennai, Jan. 8-10, paper no. P-35.
  4. Misra, R.D. and Murthy, M.S., 2008, "Solar Energy Storage- the Hydrogen Option”, In the Proceedings of the National Conference on Recent Advances in Mechanical Engineering (NCRAME 2008), NIT Silchar, Dec. 20-21, pp. 204-209.
  5. Kalita, N. and Misra, R.D., 2008, "CFD Analysis of Room Air Distribution for Comfort Air Conditioning”, In the Proceedings of the National Conference on Recent Advances in Mechanical Engineering (NCRAME 2008), NIT Silchar, Dec. 20-21, pp. 182-187.
  6. Lotha, S. and Misra, R.D., 2008, "Finite Time Optimization of an Integrated Absorption Refrigeration System in Brayton Cycle based Micro-Gas Turbine Power Plant”, In the Proceedings of the National Conference on Recent Advances in Mechanical Engineering (NCRAME 2008), NIT Silchar, Dec. 20-21, pp. 135-141.
  7. Murthy, M.S. and Misra, R.D., 2008, "Exergy Analysis of a Thermal Power Plant: A Case Study of KTVS-V”, In the Proceedings of the National Conference on Recent Advances in Mechanical Engineering (NCRAME 2008), NIT Silchar, Dec. 20-21, pp. 60-65.
  8. Sahoo, P.K. and Misra, R.D., 2006, "Thermoeconomic Optimization of a Solar Assisted Single Effect H2O-LiBr Vapour Absorption System”, In the Proceedings of the 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, IIT Guwahati, Jan. 4-6, pp. 1863-1870.

  1. Rahul Ranjan, Siddhartha Kar and Promod Kumar Patowari, Parametric optimization of micro drilling on brass in micro electrical discharge machining, AIP Conference Proceedings, 1998 (1), 020005, Renewable Energy Technology: Issues and Prospects (RETIP-2017), NIT Silchar, Assam, 2018, https://doi.org/10.1063/1.5049101.
  2. Ekta Tripathi, Tapas Debnath and P. K. Patowari, Etching characteristics of aluminium while machining square cavity using photochemical machining, AIP Conference Proceedings, 1998 (1), 020009, Renewable Energy Technology: Issues and Prospects (RETIP-2017), NIT Silchar, Assam, 2018, https://doi.org/10.1063/1.5049105.
  3. Keshob Kumar Patra, Tapas Debnath and P. K. Patowari, Fabrication of an array of square micro-holes on glass using ultrasonic machining, AIP Conference Proceedings, 1998 (1), 020013, Renewable Energy Technology: Issues and Prospects (RETIP-2017), NIT Silchar, Assam, 2018, https://doi.org/10.1063/1.5049109.
  4. Tejas Pramod Naik, Tapas Debnath and P. K. Patowari, Machinability study on German silver using wire-EDM, AIP Conference Proceedings, 1998 (1), 020004, Renewable Energy Technology: Issues and Prospects (RETIP-2017), NIT Silchar, Assam, 2018, https://doi.org/10.1063/1.5049100.
  5. Pranjal Sarma, P. K. Patowari, Alternate Soft Lithographic Approaches for Microfluidic device Fabrication Using PCM and EDM based tools, National Conference on Recent Advances in Science and Technology (NCRAST-2018).
  6. Pranjal Sarma, P. K. Patowari, Fabrication of microchannels on metal using WEDM and EDM for microfluidic applications, National Conference on Recent Advances in Science and Technology (NCRAST-2018).
  7. Siddhartha Kar, Amit Singh, Kabin Kumar Bora and Promod Kumar Patowari, Prospects of Micromachining using Electrical Discharge Machining, National Conference on Recent Trends in Engineering and Technology (NCRTET-2017) Tripura Institute of Technology, Agartala, 17-18, March, 2017.
  8. M. Rahang, P.K. Patowari, “Selective Surface Modification of Aluminum in EDM”, Proceeding of National Conference on Manufacturing: Vision for Future, Oct. 12-13, 2013, IIT Guwahati, pp. 100-105.
  9. Amit Kumar Singh, P.K. Patowari, N. V. Deshpande, “Micro-Hole Drilling on Thin Sheet Metals by Micro-EDM and its Multiple Regression Model”, Proceeding of National Conference on Manufacturing: Vision for Future, Oct. 12-13, 2013, IIT Guwahati, pp. 118-126.
  10. Shubhajit Das, P.K. Patowari and M. Eswara Krishna, Surface Modification of Aluminium Using Tungsten-Copper Powder Metallurgical Compact Electrodes in EDM, Proceedings of Symposium Processing and Fabrication of Advanced Materials XXI, held at IIT Guwahati during December 10-12, 2012.
  11. Anup Kumar Bharali, P.K. Patowari, S. Baishya, “Thermomechanical Sensitivity Analysis of an Electrothermal Actuator for MEMS Application”, 25th National Convention of Production Engineers’ and National Seminar on "Recent Developments in Manufacturing Technology", (NCPE2010), Agartala, May 8-9 2010 pp 222-228.
  12. Patowari P.K., Adhikari A., Das A.K., Roy D. “Development of a Coding Technique for a Part Family Using the Concept of Group Technology and Post Processor for Generation of CNC Program”, Proc. of National Conference on Recent Advances in Mechanical Engineering NCRAME-2008, NIT Silchar, December 20-21, 2008, pp 54-59.
  13. Barua S., Das S., Patir R., Deka D., Patowari P.K., “Design of a Power Wheelchair Making Use of Differential Gear Mechanism”, Proc. of National Conference on Recent Advances in Mechanical Engineering NCRAME-2008, NIT Silchar, December 20-21, 2008, pp 147-152
  14. Patowari P.K., Saha P., Mishra P.K., “Surface Modification of C-40 Steel using Sintered P/M Compact W-Cu electrode”, Proc. of 4th National Conference on Precision Engineering (COPEN-2005), Jadavpur University, Kolkata, India, December 16-17, 2005, pp 248-255.
  15. Patowari P.K., Saha S.C., Dey K., Mittal N., Paul U., Wankhede S., “Development of a Self Generating CNC Program, for Production of Various Profiles Defined by Functional Equations”, Proc. of National Symposium on Manufacturing Engg. In 21st Century, IIT Kanpur, India, March 2-3, 2001, pp 55-58.



  1. K.M.Pandey, P.L.Choudhury, A.P.Singh, and Prateek Srivastava, CFD analysis of a journal bearing with fluent software, the 36th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009.
  2. K.M.Pandey, A.P.Singh, P.L.Choudhary, V.Bahuguna and Akhilesh Kumar, Some theoretical studies on gas foiled bearings, the 36th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19, 2009.
  3. Sanjay Pandey K.M.Pandey and P.L.Choudhary, Static strength analysis using finite element method for water tank with belt using software ansys design space 6.1/7.1,National conference on advances in engineering design, department of mechanical engineering, NIT Hamirpur, 13-14 November 2008.
  4. Sanjay Pandey K.M.Pandey and P.L.Choudhary, Static strength analysis using finite element method for water tank with belt using software ansys design space 6.1/7.1,National conference on advances in engineering design, department of mechanical engineering, NIT Hamirpur, 13-14 November 2008.
  5. Geeta Kumari, K.M.Pandey, P.L.Choudhary, Disaster management for tourism : An overview, National seminar on earthquake hazard and disaster management of north-eastern states of India, Department of civil engineering, NIT Silchar, Assam, India , 18-20 October 2008, PP 427.
  6. Geeta Kumari, K.M.Pandey, P.L.Choudhary, Management of hydro-electric power plants: An overview, National seminar on earthquake hazard and disaster management of north-eastern states of India, Department of civil engineering, NIT Silchar, Assam, India , 18-20 October 2008, PP 48-59.
  7. K.M.Pandey and P.L.Choudhary, Environmental effects of hydro-electric power plants: an overview, presented in National workshop on engineering materials and equipments, NIT Silchar and Institute of public health engineers, India, Feb.15-16, 2008.

  1. L.Roy and B.C.Majumdar, “Effect of the location of axial groove on the steady state and dynamic characteristics of oil journal bearings.” National conference on Machines and Mechanisms, December(16-17) 2005 pp 261-268.
  2. L. Roy ,P. L. Choudhury and K. Mukherjee, “ Steady state and dynamic characteristics of oil journal bearing with an axial groove” National conference on Recent Advances in Mechanical Engineering, December (20-21) 2008,pp 130-134

  1. Sarma N.K., Biswas A., Misra R.D. Comparative Assessment of Savonius Water Turbine With Conventional Savonius Wind Turbine. Proceedings of the ASME 2019 Gas Turbine India GTIndia2019, December 5-6, 2019, Chennai, Tamil Nadu, India. Paper No. GTINDIA2019- 2459.
  2. Sarma N.K., Biswas A., Misra R.D. Comparative Assessment of Savonius Water Turbine With Conventional Savonius Wind Turbine. Proceedings of the ASME 2019 Gas Turbine India GTIndia2019, December 5-6, 2019, Chennai, Tamil Nadu, India. Paper No. GTINDIA2019- 2459.
  3. Dutta D., Podder B., Biswas A. Solar Energy Potential of Silchar, Assam, India-A Resource Assessment. Advances in Optical Science and Engineering, Springer Proceedings in Physics 166, DOI: 10.1007/978-81-322-2367-2_16.

  1. Sudipta Halder, R K Gupta, Tankeshwar Prasad, Effect of process zone on tensile behavior of DGBA/SiO2 nanocomposites, 5th National Symposium for Materials Research Scholars, MR-13, 2013, IIT Bombay.
  2. Sudipta Halder, M.S. Goyat, and P.K. Ghosh, Study on mechanical and fracture characteristics of silica-nanoparticle reinforced epoxy adhesive, National Conference on “Global challenges- Role of Science and Technology in Giving Their Solutions TIT&S bhiwani 2012, Bhiwani.

  1. A. Mandal, S. Das, G. Lingfa, and S. Deb Barma. Development of an artificial Neural Network model for LASER micro grooving operation on aluminum. Published in the proceeding of National Conference on "Design, Manufacture and Management for next Generation (DMM-2009)", Perundural, pp.- 335.


  1. Zindani, D., Maity, S.R., and Bhowmik, S., Selection of material for wind turbine blade using PROMETHEE-GAIA method, Renewable Energy Technologies: Issues and Perspectives (RETIP 2017), NIT Silchar, Assam, 25th September, 2017, AIP Conf. Proc. 1998, 020008-1–020008-6; DOI: https://doi.org/10.1063/1.5049104, Published by AIP Publishing. 978-0-7354-1714-4/$30.00.
  2. Jagadish, Bhowmik, S., Ray, A., and Gudala, S., Cutting Fluid Selection for Environmentally Conscious Design for Manufacturing: An Integrated Theory Design for Manufacturing: An Integrated Theory, Renewable Energy Technologies: Issues and Perspectives (RETIP 2017), NIT Silchar, Assam, 25th September, 2017AIP Conf. Proc. 1998, 020010-1–020010-7, DOI: https://doi.org/10.1063/1.5049106; Published by AIP Publishing. 978-0-7354-1714-4/$30.00.
  3. Jagadish, Bhowmik, S., Ray, R., and Rajakumaran, M., Optimization of Process Parameters using Fuzzy-Grey Relational Analysis (F-GRA) for Green EDM, Renewable Energy Technologies: Issues and Perspectives (RETIP 2017), NIT Silchar, Assam, 25th September, 2017, AIP Conf. Proc. 1998, 020011-1–020011-9; DOI: https://doi.org/10.1063/1.5049107, Published by AIP Publishing. 978-0-7354-1714-4/$30.00.
  4. Kumar, R., Bhargav, C., and Bhowmik, S., Bamboo fibre reinforced thermoset and thermoplastic polymer composites: A short review, Renewable Energy Technologies: Issues and Perspectives (RETIP 2017), NIT Silchar, Assam, 25th September, 2017, AIP Conf. Proc. 1998, 020018-1–020018-3; DOI: https://doi.org/10.1063/1.5049114, Published by AIP Publishing. 978-0-7354-1714-4/$30.00.
  5. Bhowmik, S., Sahoo, P., Acharyya, S.K. and Dhar, S., 2012, Effect of thickness, geometry and microstructure on fracture toughness for 20MnMoNi55 steel, Symposium on Fatigue, Fracture and Integrity Assessment-2012, Jamshedpur.
  6. Bhowmik, S., Acharyya, S., Sahoo, P. and Dhar, S., 2012, Comparative study of fracture toughness in ductile brittle transition region of 20MnMoNi55 steel, National conference on Sustainable Development through Innovative Research in Science and Technology, Jadavpur University, Kolkata.



  1. Ashish Deoghare and Pramod Padole “Finite Element Analysis of Three Dimensional Medical Model Generated from CT Scan Data” presented in 13th National conference on Machines and Mechanisms, NACoMM-2007 at IISc, Bangalore, India.
  2. Ashish Deoghare and Pramod Padole “Computer Aided Modeling of Lumbosacral Vertebral Column for Lower Back Pain” presented in 12th National conference on Machines and Mechanisms, NACoMM-2005 at IIT Guwahati, pp.357-362.

  1. Vaishali and S. Dey, Effect of thickness on stochastic natural frequency of functionally graded spherical shells, 4th Indian Conference on Applied Mechanics (INCAM 2019) held on July 3-5, 2019 at Indian Institute of Science Bangalore, India.
  2. S. Dey, A. Karmakar, Natural frequencies of bending and torsion stiff composite conical shells with delamination, 15th National Conference on Machines and Mechanisms (NaCoMM 2011), held on Nov 30 to Dec 2, 2011 at Indian Institute of Technology Madras, India.
  3. S. Dey, A. Karmakar, Characterization of natural frequencies of pretwisted single and double delaminated cross-ply composite conical shells, National Conference on Recent Advances in Materials & Technology (NCRAMT - 2011), held on June 24-26, 2011 at Haldia Institute of Technology, Haldia, West Bengal, India.
  4. S. Dey, A. Karmakar, Effect of twist and rotation on free vibration of delaminated pretwisted angle-ply composite conical shells, 4th National Conference on Emerging Trends in Mechanical Engineering (ETME 2011), held on March 18–19, 2011 at G. H. Patel College of Engineering & Technology, V.V. Nagar, Gujarat, India.
  5. S. Dey, A.Karmakar, Torsional effect on free vibration of delaminated pretwisted cross-ply composite conical shells, Conference on Trends in Mechanical Engineering (TIME’10) at KITS, Warangal, A.P., India, held on December 30, 2010 at KITS, Warangal, India.


  1. 1. Pradip Deb Roy, D. Sen, (2011) “A new concept and design of a low cost wave energy converter”. Proc., National Conference of Ocean Society of India OSICON’ 11, July, 2011, pp. 28. https://yuj.cusat.ac.in/.../2372-Proceedings_of_National_Conference_of_Ocean_Socie...

  1. Fabrication of metal matrix composites by powder metallurgy: A review, G. Manohar, A. Dey, K.M. Pandey, S.R. Maity, AIP Conference Proceedings, 1952, 2018, 020041 (1-8).
  2. Selection of material for wind turbine blade using PROMETHEE-GAIA method, D. Zindani, S. R. Maity, S. Bhowmik, AIP Conference Proceedings, 1998, 2018, 020008 (1-6).

  1. Barma, S.D., Das, B., Lingfa, P., Singh, R., (2013). Effect of Various Reaction Parameters on the Biodiesel Production Process: A Review. Published in the proceeding of the National Seminar on ‘Recent Advancements in Civil Engineering’, November, 2013, NERIST, Itanagar, India.
  2. Lingfa, P. and Das, B., (2013). Utilization of Methyl Ester of Karanja (Pongamia pinnata) oil as a supplementary fuel for compression ignition engine. Published in the (proceeding) book, ‘Recent Advancements in Mechanical Engineering’, Excel India Publishers, ISBN: 9-789382-880714. pp. 368-372.
  3. Das Biplab, Lingfa, P., Muralidhar, M., and Kathing, C., (2011). Fried Mustard Oil as an alternative fuel. Published in the book, Renewable Energy Technology: Issues and Prospects, Excel India Publishers, ISBN: 93-80697-95-3. pp. 89-92.
  4. Das Biplab, R. Gupta, (2010). Analysis of three-bladed H-Darrieus wind rotor, Proceeding of the National seminar on ‘Renewable Energy Technology: Issues and Prospects (RETIP-2010)’, September 24-25, 2010, NERIST, Itanagar, India.

  1. S. Pati, A. Dalal, Effects of Thermal Boundary conditions on natural convection in a Square Cavity, Proceedings of National Seminar on Computational Techniques on Fluid Flow and Heat Transfer (CTFFHT’07), HIT, Haldia, India, 20th January, 2007,122-131.
  2. A. Chatterjee, S. Pati, A Heat Pump for Simultaneous Refrigeration and Heating, Recent Advances in Mechanical Engineering(NCRAME-06), RIEIT, Ropar(Punjab), India, September 8-9,2006,39-42.
  3. A. Sen and S. Pati, Hydraulic Transient Analysis in a pipeline, Research Workshop on Computer Aided Engineering (RWCAE), Haldia Institute of Technology, Haldia, India, February 18,2006, 56-62.
  4. T. K. Jana, S.Pati, G.Ghosh, Design And Simulation of a PLC Controlled Hydraulic System for a Vertical Press, Computational Methods in Mechanical Engineering (COMPUTIME), Osmania University, Hyderabad, September 16-17,2005, 135-140.
  5. S. Pati, T.K.Jana, Significance of Crossover Insulation Radius along with Critical radius of Insulation for Radial Heat Conduction, Computational Methods in Mechanical Engineering (COMPUTIME), Osmania University, Hyderabad, September 16-17,2005, 251-256.
  6. G.Ghosh, T.K.Jana, S.Pati, Modelling And Simulation Of an Electro- hydraulic Servo System, Recent Advances in Manufacturing Technologies(RAMT), NIT Rourkela, October 22- 23,2005, 350-357.





  1. Rajeev Nayan Gupta and A.P.Harsha. Antiwear and extreme pressure properties of CaCu3Ti4O12 nanoparticles as biolubricant additive. National conference on Tribology­ Energy, Environment and Efficiency 2016.
  2. Rajeev Nayan Gupta and A.P.Harsha. Tribological study on CeO2 nanoparticles as a biolubricant additive. National Tribology Conference 2016. Proceeding page 29­30.
  3. Rajeev Nayan Gupta and A.P.Harsha. Experimental study on role of Zinc Dialkyldithiophosphate in castor oil. National Tribology Conference 2014. Proceeding page 122-­128.

  1. H. Vashishtha, R. V. Taiwade, S. Sharma “Study on corrosion behavior of aisi 304/Cr-Mn stainless steel dissimilar weldments produced by SMAW process using E308L and E309L. Asian pacific corrosion control conference, Jan 2016, IIT Mumbai.
  2. S. Sharma, R. V. Taiwade, H. Vashishtha, "Corrosion behaviour of austenitic and ferritic stainless steels in acetic acid" Asian pacific corrosion control conference, Jan 2016, IIT Mumbai.


  1. Sushant Negi, Suresh Dhiman and Nitin Sharma “Rapid prototyping technology: applications and issues in layered manufacturing” National conference on Advancements in Mechanical Engineering and Energy Environment (6-7 January, 2012), SLIET Longowal.
  2. Nitin Sharma, Sushant Negi and Rajesh K Sharma, “Influence of surface roughness on the fluid pressures of a couple stress based porous journal bearing” National conference on Advancements in Mechanical Engineering and Energy Environment (6-7 January, 2012), SLIET Longowal.

  1. • Finite element analysis of forging of silicon carbide particulate aluminium alloy composite preforms, S. Kar and S. Singh, Indian Science Congress, 2012, KIIT University, India.